Showing 1–48 of 110 results
ARDEX DPM 1 C is a one coat solvent free, low viscosity, two component epoxy resin. After hardening, It produces a membrane which can accommodate hygrometer readings up to 98% with high inherent bond strength. It has excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids.
Ideal for fast track installations, apply ARDEX DPM 1 C R to protect the floorcovering installation from residual construction moisture and ground water vapour.
ARDEX P 4 is a ready mixed primer for use on absorbent and non-absorbent backgrounds in internal and external locations. It produces a textured surface that is especially effective in facilitating the adhesion of cement-based tile adhesives in tile-on-tile applications.
ARDEX P 4 Primer can be used on internal and external walls, ceilings and floors. The consistency has been optimised so that dripping and splashes are virtually eliminated. For use prior to the installation of ARDEX tile adhesives and floor-levelling compounds. It produces a textured grip which facilitates tile on tile application, eliminating the risk of adhesives slipping when being applied to smooth surfaces.
ARDEX P 51 is a multi-purpose primer ideal for priming porous surfaces prior to the application of ARDEX water-based levelling and smoothing compounds.
It is perfectly suited to the needs of contractors who require work convenience as well as for demanding investors who value aesthetics, functionality, safety and long-lasting effect.
ATLAS SILTON S is an one-component sealant based on polymers with acetate hardening system. Due to its characteristic it can be widely used in residential and industrial construction. Recommended for sealing the joints between the cladding and the room equipment – around shower cabins, shower basins, joints bathroom furniture and fittings, wash basins, toilets, bath tubs, kitchen worktops, sinks.
It is a ready-made mass manufactured on basis of polymer resins with addition of selected quartz aggregate.
ATLAS UNI GRUNT is an impregnating sealer for priming, manufactured on the basis of the finest quality water dispersion of polymer resins.
It is a rapid-drying acrylic primer suitable for priming wall and floor backgrounds prior to the fixing of ceramics, mosiacs and natural stone tiles in dry or wet interior and exterior environments. BAL Prime APD stabalises dusty surfaces and reduces the porosity of backgrounds and may be used undiluted on plaster walls, tongue and groove floorboards. Use diluted on plaster walls (if dusty or porous), Anhydrite and cement floors. Use diluted on plaster walls when using ready mixed adhesives.
Perfect for priming walls and floors, BAL Prime APD offers a number of benefits for the fixer. Available in 2.5 litre bottles, the product can also be used with BAL levelling compounds and the BAL WP1 Tanking System. BAL Prime APD can be used undiluted and diluted and helps stabilise backgrounds prior to tiling in interior or exterior environments.
USE FOR:
USE UNDILUTED ON:
USE DILUTED 1:1 with clean water on and a second coat:
MAY BE TILED AFTER: 30 minutes
A water-based temporary protective tile sealer, BAL Protective Sealer protects surfaces against discolouration when using pigmented grouts. For use with all BAL grouting products, it can be removed by washing-off after grouting.
Suitable for most tile types, BAL Protective Sealer is an essential part of any tilers’ toolbox removing any potential need to re-grout or re-tile which could add significant costs and time to your job.
Typical Coverage per pack:
| Tile Sizes: | 152x152x5.5mm |
|---|---|
| Size: 2.5L | 25-37m² (with 2 coat application) |
Bostik AP 250 Flexibond is an acrylic dispersion for use as a Primer/sealer for tile adhesive or as a flexible admixture with cement based tile adhesives and/ or grouts.
The addition of Bostik AP 250 Flexibond to a non-polymer modified adhesive or grout is required where surfaces are prone to very minor movement and vibration, or where direct fixing to glazed tiles or other impermeable surfaces is required.
Bostik SBR is a specially modified Styrene Butadiene Co-polymer Latex for cement and mortar.
It toughens, waterproofs and improves chemical and abrasion resistance of renders, screeds and mortar. It is an excellent all round primer and bonding agent and is especially suitable for external applications.
It can be used for waterproof rendering, flooring screeds and toppings, as well as for bonding renders and suction control.
Bostik Cempolay Universal Primer is a water-based, solvent-free acrylic dispersion floor primer and bonding agent that’s suitable for use prior to the application of any Bostik levelling compound.
When applied undiluted, it acts as a bonding agent on non-porous surfaces such as power floated concrete, ceramic tiles, quarry tiles, rigid metal, terrazzo, asphalt and surface membranes.
In diluted form, it can be used as a primer on porous surfaces and will dry within one hour depending on the conditions.
Brit Aqua Membrane is a decoupling and tanking membrane to accommodate lateral movement for tiling installations on floors with limited movement when used as a system with Brit Adhesives cementitious tile adhesives.
Brit Aqua Membrane is easy to install, particulary for quick sealing and decoupling. The mat is resistant to weathering and alkali and is compatible for both internal and external flooring applications for ceramic, porcelain, slabs, natural stone and concrete pavers.
Can be used for domestic / commercial areas including balconies and terraces, bathrooms, kitchens, wet-rooms, showrooms, shopping and leisure centres etc. Brit Aqua Membrane is also recommended for heated / un-heated screeds and timber floors.
SPECIFICATIONS:
The Brit Aqua Tanking System is ideal for use in wet-zone areas such as wetrooms, bathrooms and showers, by creating an inpenetratable waterproof barrier for maximum protection. Suitable for use on all floors and walls and is compatable with the following base substrates; Plaster, Drywall, Timber, Plywood, Concrete, Brickwork, Cement Boards, Wedi Boards etc…
Aqua Tanking System Includes:
It is a ready mixed, flexible, seamless tanking membrane for the interior waterproofing of water sensitive wet-room walls and floors prior to the installation of ceramic and natural stone tiles.
Suitable for use in domestic and commercial situations. Stir well before use. Brit AquaSeal should be applied evenly to the substrate using either a wool roller or brush (the final thickness must be at least 1mm). Apply a second coat 90° to the first coat once the first coat has dried (usually 3 hours at temperature of +20°C).
SPECIFICATIONS:
Brit Latex Additive is a cement mortar modifier to improve the physical and chemical properties of cementitious adhesives which it is mixed with. Enhances performance of tile adhesives by improving adhesion and flexural strength, abrasion resistant, impact strength, compressive and tensile strength. Compatible with most concrete and cementitious mixtures and has an optimum pot life with excellent adhesion to masonry, concrete and other porous substrates. Can be used in interior and exterior environments in both wet and dry conditions.
Should NOT be mixed with highly polymer modified (S2) cementitious adhesives and ready mixed products.
SPECIFICATIONS:
Brit-Prim Grip is a premium quality primer with adhesion-enhancing additives for use on non-absorbent and absorbent internal and external wall and floor surfaces, prior to the application of ceramic tiling systems. Brit-Prim Grip provides a rough keying surface allowing installation of ceramic and natural stone tiles onto pre-existing old wall and floor tiles.
Suitable substrates are, hydraulically bonding cements, lime cast, gypsum plaster, plaster boards, gypsum fibreboard, brickwork, aerated concrete, limestone, cement, anhydrite, magnesia and poured asphalt flooring, wooden floorboards, self-levelling compounds, natural stone, vitrified tiles, steel and glass.
SPECIFICATIONS:
A one sided, fleeced, self-adhesive tanking tape for the permanent sealing of elastic joints beneath tiles. Can be used for internal and external applications in wet based areas including showers, bathrooms and kitchens.
Application:
Cut the Butyl Sealing Tape to the required length and remove the silicone strip on the back before pressing firmly onto the surface provided. For maximum adhesion, the Butyl Sealing Tape must be correctly positioned the first time it is attached to the surface as additional corrections to the sealing tape will result in a weaker bond to the surface.
When applying the Butyl Tape, ensure there is a tape overlay of 5cm.
SPECIFICATIONS:
A flexible, alkali resistant, nitrile waterproofing tape to be used in conjunction with Brit AquaSeal for sealing edges and expansion joints.
Cut the sealing tape to the required length and press onto the fresh Brit AquaSeal compound, which serves as the adhesive base. Ensure that there is a tape overlap of at least 5cm. Use a smoothing trowel to level out any uneven areas or distortions.
Apply two generous coats of Brit AquaSeal over the installed waterproofing tape, ensuring full coverage.
SPECIFICATIONS:
A flexible, polymer modified, water resistant grout for use on walls and floors. BRITFLEXI will give a non-slump, smooth grout ideal for all types of tiles. Suitable for internal and external use. Ideal for use in swimming pools and frequently wet areas. Can be used in joint sizes 2mm-20mm. Conforms to BSEN13888 CG2WA.
10kg Bags now available in new re-sealable packaging.
AVAILABLE COLOURS: WHITE, JASMINE, BEIGE, LIMESTONE, SILVER GREY, GREY, MEDIUM GREY, MANHATTAN GREY, ANTHRACITE, CHOCOLATE & BLACK
SPECIFICATIONS:
A solvent free, acrylic primer for interior use with the Brit Adhesives range of tile adhesives and self levelling screeds. Suitable for priming gypsum walls / floors and prepared calcium sulphate screeds.
BritPrimer prevents over rapid dehydration of thin-bed mortars and levelling compounds. It also improves adhesion and prevents shrinkage cracking of covering layers.
SPECIFICATIONS:
Units available: 1L and 5L bottles
A styrene / acrylate, copolymer, hydrophobic dispersion. Provides excellent adhesion, water resistance and an outstanding strength to inorganic substrates. Can be used to produce highly waterproof films, which adhere strongly even in damp conditions.
The formulation of BritPrimer HD allows it to perform optimally, providing enhanced adhesion to even the most difficult of substrates. This optimal performance also allows BritPrimer HD to improve the workability of the Brit Adhesives’ range of cementitious tile adhesives, offering numerous benefits including:
Good compatibility with pigments and fillers
SPECIFICATIONS:
Everbuild 201 Mortar Admix is an air entraining plasticiser that replaces lime in the mix to provide an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process. For use in brick laying and plastering mortars.
Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set.
The admix improves workability and freeze/thaw resistance in brick laying mortars, reduces the need for lime and smoothes out variations between separate batches of
sand and cement.
Everbuild 503 SBR Bond is a latex based, water resistant bonding agent and admixture for use in areas subject to humidity, dampness and continuous water contact.
It improves water resistance of cement mixtures by forming a reinforcing polymer that increases long-term durability and flexibility of the mix on renderings and floor screeds.
EVERBUILD EVERFLEX 700T Silicone is a low modulus, neutral cure RTV silicone sealant that adheres to a wide range of both porous and non porous surfaces without the need for priming.It is formulated to a high viscosity to give excellent tooling properties.
EVERBUILD EVERFLEX 200 Contractors LMA Silicone is a cost effective Acetoxy cure sealant that adheres to most smooth and non-porous materials. This product contains an anti-fungal compound to protect the sealant against the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. It is mid to low modulus in nature.
Application temperature resistance +5°C to +40°C . Minimum joint width 4mm . Maximum joint width 25mm . Joint ratioMaximum depth 50% of joint width
EVERBUILD EVERFLEX 335 Construction Silicone is a low modulus, reactive curing silicone sealant that cures quickly to reduce dirt pick up. It remains permanently flexible, forming a weather tight rubber-like seal.
Certified under the harmonized European standard EN15651 for façade, glazing, cold climate and sanitary applications in compliance with the Construction Product Regulation.
Meets ISO11600 F and G 20LM
* Box of products need to have a pallet, 1/2 or 3/4 of any Sika / Everbuild / Feb in your order to checkout. (it's how we do free delivery)
EVERBUILD EVERFLEX 450 Builders Silicone is a premium quality low modulus non-corrosive neutral cure silicone sealant that adheres to virtually all substrates, both porous and non-porous. Typically used for construction expansion joints and perimeter pointing of all types of door and window frames.
Shrinkage < 5%
Uses
EVERBUILD EVERFLEX 500 Bath & Sanitary Silicone is an acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. Specifically designed for sanitary applications and for areas of high humidity. It contains a powerful fungicide to prevent mold growth.
Usage
EVERBUILD EVERFLEX AC50 is a high strength, permanently flexible acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard and other kraft lined insulation boards to common substrates.
Approvals: Independently tested to BS EN ISO 140/3. EN15651-1:2012. EN13963:2005
* Box of products need to have a pallet, 1/2 or 3/4 of any Sika / Everbuild / Feb in your order to checkout. (it's how we do free delivery)
EVERBUILD EVERFLEX AC95 is a high strength, permanently flexible intumescent acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard and other Kraft-lined insulation boards, where a fire-rated seal of up to 4 hours is required. Water based, solvent-free formula, easy to use and clean up and adheres to just about all building substrates. Non-flammable.
Approvals & standards
The multipurpose acetoxy cure silicone sealer EVERBUILD General Purpose Silicone cures fast to produce an extremely strong, permanently flexible seal. In order to prevent the formation of bacteria, mildew, and black mold—all of which are frequently found in high-humidity areas – the sealant is formulated with a fungicide.
EVERBUILD Instant Nails® is a high strength solvent free gap filling multi use adhesive that provides a quick grab and replaces mechanical fixings in many home improvement applications.
Uses
EVERBUILD ROLL & STROLL Premium Carpet Protector is the ultimate self adhesive carpet protector, ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work. It is ideal for protecting stair carpets and can be used for commercial and domestic applications. Totally waterproof, it protects against expensive-to-clean paint spillages on carpets. Due to the adhesive face being reverse wound, EVERBUILD ROLL & STROLL Premium Carpet Protector easily unwinds with minimum effort and no need to bend down
Usage
Approvals / Standards : Reaction to fire EN13501-1 Classification: BFL-s1
* Box of products need to have a pallet, 1/2 or 3/4 of any Sika / Everbuild / Feb in your order to checkout. (it's how we do free delivery)
EVERBUILD ROLL & STROLL Glass Protector film is the ultimate self adhesive glass protector, ideal for protecting glass against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work. Totally waterproof, it protects against the need to scrape glass clean reducing the risk of damage and expense. Due to the adhesive face being reverse wound, EVERBUILD ROLL & STROLL Glass Protector film easily unwinds with minimum effort.
Adhesive Pressure sensitive acrylic Slip Characteristics 0.45 – 0.60 CoF.
* Box of products need to have a pallet, 1/2 or 3/4 of any Sika / Everbuild / Feb in your order to checkout. (it's how we do free delivery)
Stixall Extreme Power offers almost limitless benefits as an adhesive and a sealant removing the previous application barriers associated with conventional products.
Everbuild Tecnic Silicone 825 is a low modulus, neutral cure, alcoxy, low odour silicone sealant that adheres to a wide range of both porous and non porous surfaces without the need for priming.
Kerakoll Active Prime Fix’s active cross‑link develops total compatibility with absorbent and non‑absorbent substrates, and guarantees maximum adhesion when overlaying with cement, and gypsum‑based mineral products.
Kerakoll Active Prime Grip’s active cross‑link develops total compatibility with absorbent and non‑absorbent substrates, and guarantees maximum adhesion when overlaying with cement‑, and gypsum‑based mineral products.
Certified, eco‑friendly, breathable, anti‑alkali and chlorine‑resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives.
Certified, eco‑friendly, breathable, anti‑alkali and chlorine‑resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives.
<]Kerakoll Keragrip Eco develops extended overlay times, making it safe and easy to apply high‑adhesion mineral levelling and self‑levelling products, even when overlaying.
It’s a water repellent wood treatment, suitable for use on all types of timber structures. Refreshing the natural colour, whilst also protecting against the seasonal effects of weathering and prolonged outdoor exposure. Treatable surfaces include doors, frames, hardwood patio chairs, tables, window boxes and trellis work.
SikaBond® Rapid DPM is a single part moisture curing polyurethane.
For priming, consolidating and sealing of:
LANGLOW RAW LINSEED OIL is a natural wood treatment for use on all types of soft and hardwood timber furniture and leisure equipment such as willow cricket bats, hard and softwood patio chairs, tables, window boxes and trellis work, leaving a matt appearance, raising the grain profile, whilst also protecting against the damaging effects of weathering and prolonged outdoor exposure. Repeat applications will improve the oily feel of the timber preventing the wood from drying out and cracking, but will not affect the natural matt appearance of the bare timber.
LANGLOW TEAK OIL is a water repellent wood treatment suitable for use on all types of soft and hardwood timber structures and garden furniture timbers such as doors, frames, hardwood patio chairs, tables, window boxes and trellis work, improving appearance, refreshing the natural colour, whilst also protecting against the seasonal effects of weathering and prolonged outdoor exposure.
Larsen Acrylic Primer is a ready to use primer for use on porous and difficult substrates prior to tiling or screeding, or to seal gypsum plasters or screeds prior to the addition of cement based adhesives.
It can be used neat when sealing substrates or diluted with an equal quantity of water for general priming.
William P
2 days ago
Simple to use website with competitive prices and excellent customer service - what a smooth and pleasant buying experience! Would highly recommend!
Darren Parkes
2 weeks ago
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
Otis Barclay
2 weeks ago
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Dean Clare
a month ago
Top quality service.
Kelvin Wiltshire
a month ago
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
Aaron Nairn
5 months ago
Fantastic customer service and fast delivery, highly recommend
Gary Dawson
10 months ago
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
Phil Down
10 months ago
They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.
Gary Harper
a year ago
Great service, great price and great communications. We will definitely use Buy The Pallet again
Steve Brock
3 years ago
I got great service from these guys. The products were at the right price and delivered very quickly. I would definitely recommend them and will be using them again.
Rob Jones
3 years ago
Companies like this a rare, great quick service, great price and easy to do business with. Will definitely use them again for all my supplies.
Stephen Tucker
a year ago
Great customer service and at an unbeatable price. All delivered on the day I needed it.
phil harvey
4 years ago
First class service, good price, fast delivery and the chap at the end of the phone knew what he was on about. Highly recommend and will use them again.
Boon Teo
a year ago
Great prices with a good ranges of products . Customer Service is excellent!
Peter Bostock
3 years ago
I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend
Kev in
3 years ago
Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive
Rob Faulkner
3 years ago
Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.
