Rocatex Colour Enhancing Sealer extended information
DIRECTIONS
Shake prior to use. Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash the surface with a dilute solution of ROCATEX Tile & Stone Renovator 1:10. Rinse well to remove residues and leave to dry (24 hours). Apply this sealer thinly with a soft cloth, brush, paint pad or roller. Ensure even distribution by working in the sealer with a lint free cloth and remove any residue/pooling within 20 minutes and do not allow any excess to dry on the surface as it can be very difficult to remove this sealer when hardened. Leave 1 hour between coats. More absorbent floors may require further coats and do so by applying coats thinly and uniformly.
This product will dry after about 1 hour, but will take a further 71 hours to become fully resistant. During this time DO NOT allow the surface to get wet and wipe up any spills immediately. Consideration should also be given to any moisture trapped in a surface on newly laid floors in terms of covering the surface after sealer application.
The aim is to completely fill the substrate with sealer without over applying it. Do not apply in direct sunlight or in temperatures exceeding 25°C. Do not allow any residues to dry on the surface and you must NOT apply if an underfloor heating system is on. Use only in well ventilated areas. Do not grout until 4 hours after applying the sealer. Tip: Without prior experience or in cases of doubt, try the product in an inconspicuous area prior to use.
Rocatex Colour Enhancing Sealer COVERAGE
Higher porosity:
Per 1 litre approximately 10m2 per coat.
Lower porosity:
Per 1 litre approximately 20m2 per coat.
Polished floors:
Per 1 litre approximately 25m2 per coat.
MAINTENANCE
Routinely sweep the floor and wash with ROCATEX Tile & Stone Cleaner. Clean walls and work surfaces with ROCATEX Tile & Stone Cleaner. Heavily used areas may require intense cleaning every 2-3 years and you can use ROCATEX Tile & Stone Renovator (refer to data sheet) followed by a top up coat of sealer.
STORAGE
Store in a cool, dry, frost free environment.
There are no reviews yet.