EVERBUILD EVERFLEX 700T Silicone is a low modulus, neutral cure RTV silicone sealant that adheres to a wide range of both porous and non porous surfaces without the need for priming.It is formulated to a high viscosity to give excellent tooling properties.
£51.40 – £88.70 +VAT
Application Temperature: +5 °C to + 40 °C
Resistance
Elongation at break: >200 % ISO8339
| Shore A Hardness | 20 to 30 |
| Modulus of Elasticity in Compression | <0.4 MPa |
| Secant Tensile Modulus | <0.4 MPa at 23 oC (ISO8339) |
| Movement Capability | 25 % (ISO9047) |
| Shrinkage | <10 % (ISO10563) |
| Service Temperature | -50 °C to +120 °C |
| Joint Design | Maximum depth 50 % of joint width; movement capacity will be impaired if the depth of the joint is greater than the width. For maximum movement accommodation, it is recommended that: 1. The joint depth should be no less than 5 mm 2. Joint depth should be 5 mm for joints up to 10 mm wide 3. Joints above 10 mm in width should be half the width in depth up to 20mm For deep joints, reduce depth by using Fix and Fill Expanding Foam or a suitable joint backer rod. All joints should be designed so that the seal is placed in a position which does not retain water or form a water trap. Triangular fillets should be no less than 12 mm across the face and should be finished with a flat or convex face. |
| Chemical Base | Neutral cure silicone |
| Packaging | 300 ml Cartridges |
| Shelf Life | 12 months from date of manufacture (White, Black, Brown, Caramel, Bronze and Mahogany) 18 months from date of manufacture (Translucent) |
| Storage Conditions | Store in original unopened containers between 5°C and 25°C |
| Colour | ack, Brown, Bronze, Caramel, Mahogany, Translucent and White |
| Density | Colours ca. 1.35 g/cm3 Translucent ca. 1.0 g/cm3 |
The surfaces must be clean, dry and free from dust, grease and other contaminants. As quality of plastics can vary, always carry out adhesion tests prior to large scale use.
Improve adhesion by wiping surface with PVCu Solvent Cleaner or white spirits (painted surfaces). Priming is generally not required, although we always advise testing small areas prior to use. Prime with Sikaflex Primer 3N for porous and Aktivator 205 for non-porous substrates if priming is to be conducted.
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45 ° with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed. To ensure a proper bond, always smooth the sealant down with a spatula or piece of wood An improved joint appearance can be achieved by placing masking tape to both sides of the joint, removing within 5 minutes of application.
| Yield | 10.5 Linear metres for a 6 mm diameter bead. |
| Sagging | <3 mm (ISO7390) |
| Curing Rate | 1 mm per 24 hours |
| Skin Time | 5 - 25 minutes. |
It is the user’s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice.
| Brands |
|---|
You must be logged in to post a review.
outstanding customer service. prompt emails and felt like they actually cared about you as a customer.
Great company, really good prices…Kev does what he’s able to do to make sure he’s giving the best prices. Lent in and kept us up to date with all delivery reports, which was really helpful as I was not able to remain on site and wait.Would definitely use as my first port of call in the future. Good to see great customer service still exists!
Order two pallet loads of Titan Pro Joint, it was delivered first thing the following morning. I was stunned at how quickly Buy The Pallet were able to process and dispatch my order! Would highly recommend.
Simple to use website with competitive prices and excellent customer service - what a smooth and pleasant buying experience! Would highly recommend!
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Top quality service.
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
There are no reviews yet.