!FREE DELIVERY on Every Order (Most of Mainland UK) *
, ,

Sikafloor 440 Level Fibre Reinforced Self Levelling Compound – Pallet Deals and Bulk Buy

Sika Pallet Deals and Bulk Buy

Sikafloor 440 Level Fibre Reinforced

Heat-resistant, fibre reinforced self levelling compound

Sikafloor 440 Level Fibre Reinforced is a fibre and polymer reinforced, flexible, high strength cement based levelling compound, designed specifically for use with underfloor heating and for application over wooden floors. Once mixed with water, Sikafloor 440 Level Fibre Reinforced produces a smooth self-levelling compound which dries to a tough flexible finish which may then be overlaid with most common floor coverings or left as a final wearing surface.

  • Rapid setting and may be walked on in 3 hours
  • Can be overlaid with ceramic tiles after only
  • 4-5 hours at normal temperatures.
  • Strong enough to accept light vehicular traffic
  • Can be overlaid with a suitable covering or used as a final wearing surface
  • Designed for the embedment of underfloor heating elements
  • Conforms to EN13813 CT-C25-F5-AR0.5

Uses

  • Embedment of underfloor heating
  • As a final wearing surface
  • Suitable for levelling/smoothing uneven floors
  • Suitable for covering existing concrete, sand/cement screeds, brick, stone, unglazed ceramic tiles, plastic sheet DPC, epoxy membranes and wooden floors
  • Internal and external use

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@buythepallet.co.uk
~ FREE DELIVERY on Feb / Everbuild / Sika is 2 - 5 working days ~

£595.50£1,185.00 +VAT

£595.50 +VAT
£833.70 +VAT
£1,185.00 +VAT
x

Sikafloor 440 Level Fibre Reinforced extended information

Consumption: 20 kg will cover approximately 2.4 m2 at a depth of 5 mm

Limitations

  • Always mix with clean fresh water and always prime floors as directed.
  • Always apply this product whilst primer coat is still damp.
  • Never exceed the quantity of water stated. This will dramatically reduce strength and cause cracking.
  • Do not mix more compound than can be laid in 20minutes and never try to reconstitute once the product has set.
  • On substrates where underfloor heating is in place, switch off the heating for 24 hours before, and until 24 hours after, application.
  • Do not use this product below 4 °C.
  • In areas where movement is anticipated, always use SikaBond® SBR+ diluted 1:1 with water rather than water. NO OTHER MANUFACTURER’S PRODUCT MAY BE USED.
  • To avoid cracking/crazing, existing concrete screeds/asphalt/bitumen/bituminous coatings must be a minimum of 4 weeks old before overlaying with this product.
  • As the manufacturer cannot know all the uses their products may be put to, it is the user’s responsibility to determine suitability for use. If in doubt, contact Technical Services Department.

Sikafloor 440 application instructions

Floors to be treated must be free from grease, dust and loose particles. Substrates must be porous. Always prepare floors by dampening with water then priming with SikaBond® PVA+ or SikaBond® SBR+ diluted 1 part PVA/SBR to 3 parts water to give a sound, slightly damp surface. Deep depressions and holes should be filled with a suitable repair mortar and allowed to dry.

20 kg of Sikafloor® 440 Level Fibre Reinforced will require 4.2-4.4 L of water. DO NOT USE EXCESS WATER. Always add the powder to water. This should be car- ried out by stepwise addition whilst stirring until a free flowing creamy compound is produced. Pour the mixture out into the prepared floor and allow it to find its own level. Trowel down lightly to achieve an overall thickness not exceeding 30 mm. Minimum thicknesses for a wooden substrate is 10 mm.

SAND / CEMENT RENDER

Allow at least four weeks drying before application. Dampen floors and prime with SikaBond® PVA+ diluted 1:3 with water. Mix with water as detailed above. For surfaces to be subjected to heavy foot traffic, use SikaBond® SBR+ diluted 1:1 with water rather than just water when mixing the powder.

TIMBER FLOORS

Floors must be securely screwed down at 300 mm centres. Apply SikaBond® SBR+ to the floor at a 1:1 dilution and apply to subfloor whilst the bonding coat is still tacky.

EXISTING VINYL TILES

Ensure tiles are clean and sound. Prime with SikaBond® SBR+ diluted 1:1 with water and apply floor level compound mixed with SikaBond® SBR+ diluted 1:1 with water over tiles whilst primer coat is still tacky. Allow 24 hours before applying final covering.

Sikafloor 440 Product Information

Packaging20 kg Sack
Appearance / ColourFine grey powder
Shelf Life6 months from date of manufacture
Storage ConditionsThis product must be stored in unopened bags clear of the ground in cool dry conditions. The use of this product after the end of declared storage period may increase the risk of an allergic reaction.
Abrasion ResistanceBCA Wear Resistance Class AR 0.5
Compressive Strength25 N/mm2
Flexural Strength5 N/mm2

Sikafloor 440 Application information

Mixing Ratio20 kg of Sikafloor®-440 Level Fibre Reinforced mixed with 4.4 litres of clean water
Consumption20 kg will cover approximately 2.4 m2 at a depth of 5 mm
Layer Thickness2 mm - 30 mm
Ambient Air Temperature4 °C to 35 °C
Pot Life20 minutes at 20 °C
Waiting Time / OvercoatingWill accept foot traffic in approximately 3 hours at 20 °C.
Can accept floor coverings in approximately 4-5 hours.
These setting times will be significantly extended at lower temperatures over low porosity subfloors.
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Sikafloor 440 Level Fibre Reinforced Self Levelling Compound – Pallet Deals and Bulk Buy”

There are no reviews yet.

 

Buy The Pallet - Tile Adhesive and Floor Levellers Discount Store

5.0Out of 5 stars

Overall rating out of 16 Google reviews

Phil Down
3 hours ago

They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.

Dom
3 weeks ago

BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value

Gary Harper
2 months ago

Great service, great price and great communications. We will definitely use Buy The Pallet again

Adrian W
4 months ago

Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.

Stephen Tucker
4 months ago

Great customer service and at an unbeatable price. All delivered on the day I needed it.

Boon Teo
4 months ago

Great prices with a good ranges of products . Customer Service is excellent!

Max Simpson
5 months ago

Very helpful!

Neil Salih
3 years ago

Peter Bostock
3 years ago

I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend

Kev in
3 years ago

Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive

Rob Faulkner
3 years ago

Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.

Richard Fairlie
3 years ago

Great service and really good pricing! Super fast delivery and really lovely guy!

Marc. T
3 years ago

Very helpful