Larsen Streetscape GPM Eco is a high strength gun applied jointing mortar. GPM Eco is pre-blended under controlled systems and only requires the addition of water to produce a high quality mortar for rigid construction methods. It is ideal for the pointing of natural stone flags, setts and cobbles, concrete pavers, brickwork and natural stone walling. Larsen Streetscape GPM Eco is a dry blended product that gives the applicator consistent colour and strength throughout the project. The finished joints are highly resistant to freeze thaw action and when correctly installed will not be damaged by mechanical street cleaning. It comes in a range of colours to suit your requirements.
Eco – Reduced Carbon.
FBC Eco Permeable is the equivalent to carbon absorbed by growing two trees for 10 years or not driving a car for 313 miles per tonne of product used.
£542.90 – £757.90 +VAT
| FORM | Granular |
| COLOUR | Natural (Grey), Buff, Yorkstone, Charcoal, Black, White and other colours on request |
| MAX AGGREGATE: | 1.2 mm |
| HAZARD INFORMATION: | Contains cement. Consult Safety Datasheet before use |
| CLEANING: | Clean tools, equipment, etc. using warm water. Mechanical means are necessary when the product has set. |
| PACKAGING | 25 kg multilayer paper |
| STORAGE INSTRUCTIONS: | Store unopened containers in a dark, cool, dry location away from extremes of temperature |
| SHELF LIFE: | Minimum 6 months in unopened manufacturer's containers temperature |
| DEMAND | 4.0 to 5.0L. per 25kg |
| APPLICATION TEMPERATURE | +3°C to +30°C |
| WORKING TIME | Approx. 40 minutes |
| MINIMUM JOINT WIDTH | 5mm |
| MAXIMUM JOINT DEPTH | 150 mm |
| COVERAGE | 25 kg will cover approx. 28 linear metres of joint 5 mm wide x 10 mm deep |
| POT LIFE | 30-40 min |
| SETTING TIME | ca. 4hrs |
| DRY HARDENED DENSITY | ca. 2000 kg/m3 |
| COMPRESSIVE STRENGTH | 28day >15 MPa |
| FLEXURAL STRENGTH | 28day >4 MPa |
All surfaces must be sound, clean, and free from any loose or friable material. For paving applications, Larsen GPM Eco should only be used on rigid constructions. On pointing application where previous mortar has been raked out, ensure all dust has been removed and joint depth is at least 1.5 times width. All joints must be saturated with clean water but free from standing water.
Mix each 25 kg bag with 4.0-5.0 L clean water. Larsen GPM Eco should be mixed with the correct amount of water using a mechanical method, i.e. low-speed drill and mixing paddle. Mix for a minimum of 3 minutes, allow to stand for 2 minutes, then remix. To check consistency, fill the tube of pointing gun and shake, the mortar should ‘hang’ from the nozzle. Do not mix more product than can be used in approx. 40 minutes. Do not add more water or ‘wet-up’ mortar which has begun to set.
Larsen GPM Eco can be applied to joints from 5 mm wide and up to 150 mm deep. Joint depths should be ideally be a minimum of 1.5 times joint width. After filling pointing gun, place nozzle as deep as possible into the joint and inject the mortar. Fill the joint from the bottom and allow to slightly overfill joint. Allow mortar to stiffen before tooling as required. Any mortar remaining on the surface of the masonry or paving unit should be washed off before it has set. Use of excessive water and/or ‘wash-boys’ to clean the face of the joint and paving or masonry unit is not recommended as the high amount of water can result in efflorescence. Where colour is critical, always carry out a trial area of at least 1m2 and ensure the same batch of material is used. If in doubt contact our technical department for more advice.
Not suitable for use in flexible or unbound constructions. Not suitable for filling of live cracks or movement joints. Ambient and substrate temperatures should be above 3°C during application. Slight batch to batch colour variations may occur. Always work with the same batch of material where possible or premix batches to reduce visible variations. Fresh mortar should be protected from frost and inclement weather. When ambient or substrate temperatures are below 10°C, allow extra time for the material to harden. Efflorescence and Limebloom are natural phenomena affecting all cement based materials. Their occurrence are transitory and in no way affect the ultimate performance or durability of the product. Occurrences can be minimised by avoiding working in cold and damp conditions, protecting fresh mortar from excessive water during early age from clean-up operations and unfavourable weather until sufficiently cured to withstand them.
This product is manufactured in a plant controlled under an integrated management system third party certified to BS EN ISO 9001 and BS EN ISO 14001.
| Brands |
|---|
You must be logged in to post a review.
outstanding customer service. prompt emails and felt like they actually cared about you as a customer.
Great company, really good prices…Kev does what he’s able to do to make sure he’s giving the best prices. Lent in and kept us up to date with all delivery reports, which was really helpful as I was not able to remain on site and wait.Would definitely use as my first port of call in the future. Good to see great customer service still exists!
Order two pallet loads of Titan Pro Joint, it was delivered first thing the following morning. I was stunned at how quickly Buy The Pallet were able to process and dispatch my order! Would highly recommend.
Simple to use website with competitive prices and excellent customer service - what a smooth and pleasant buying experience! Would highly recommend!
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Top quality service.
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
There are no reviews yet.