Everbuild Jetcem Rapid Repair Cement – Bulk Buy and Pallet Deals

Everbuild Jetcem Rapid Repair Cement extended information

EVERBUILD® JETCEM® RAPID SETTING CEMENT is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.

Uses

• Internal and external repairs to gaps and cracks and walls and floors.
• Repairing flags, slabs, stones and bricks.
• Patching steps and window sills.
• Pointing brick and stone.
• Jointing earthenware pipes and drains.
• Repairs to ponds and pools.
• Setting in W/C’s and sinks.
• Leak sealing in concrete based surfaces.
• Setting railings and posts.

Everbuild Jetcem Rapid Repair Cement – Characteristics and Advantages

• Rapid setting (30 minutes, depending on ambient temperature and conditions).
• Easy mixing, just add water.
• Fills up to 25mm in one application (for deeper holes in excess of 25mm use Jetcem Premix sand/cement)

Approvals & Standards

Tested to BSEN1504 – 3 Class R2

Everbuild Jetcem Rapid Repair product information

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PRE-TREATMENT

Before applying, ensure surfaces are clean, sound and free from dust, crumbly material or any contaminants which may affect adhesion.

EVERBUILD JETCEM  RAPID REPAIR CEMENT – APPLICATION

• Thoroughly wet surfaces to improve adhesion.
• Always use a clean mixing vessel and add approx. 3 parts by volume powder to one part by volume clean cold water and mix immediately to a smooth, reasonably thick slump free paste. The mixed cement will remain workable for 5-10 minutes only. MIX NO MORE CEMENT THAN CAN BE USED IN 5 MINUTES
• Press the cement into the repair with a trowel or filling knife.
• Once the product begins to stiffen, throw away the residue. DO NOT ADD FURTHER WATER TO THE MIX. THIS WILL DESTROY STRENGTH.
• In warm conditions, cover Jetcem with polythene to assist cure.
• Clean tools etc with warm water before EVERBUILD  JETCEM RAPID SETTING CEMENT dries.

LIMITATIONS

• This product should not be used for load bearing applications. Use EVERBUILD ANCHOR SET.
• For holes deeper than 25mm use Jetcem Premix Sand/Cement.
• Do not use where chemical resistance is required. Use EVERBUILD 105 EPOXYSET STANDARD
• Repairs to fishponds etc – seal repair with a suitable paint before re-stocking.
• It is always the user’s responsibility to determine suitability of use. If in doubt contact Technical Services department.