More about UltraFloor Level IT Top
Ultra Floor Level IT Top is a polymer rich, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials.
It has exceptional abrasion resistance and is designed for use as a finished wear surface in both industrial and commercial applications. Its early strength development formulation also makes it ideal for overcoating with resin coatings.
Uses
When mixed with clean cold water, UltraFloor Level IT Top is a product that can be trowel or pump applied, to smooth and level, sound and strong internal subfloors where a finished wear surface is required.
It is suitable for use in heavily trafficked areas such as warehouses, storage areas, corridors and factory units.
It is ready to receive fork lift traffic after as little as 36 hours. For projects where the visual aspects of the floor are important it must be noted that we cannot guarantee colour consistency in the product due to variables in raw materials and in application methods.
UltraFloor Level IT Top can be overcoated with resin coatings and sealers in situations where an aesthetic finish is required and where Level IT Top needs protection from chemicals, oils and other liquid ingress or if an improved slip resistance is required.
UltraFloor Level IT Top has a protein free formulation so may be used in biologically sensitive areas, it can be applied to most cementitious subfloors including those incorporating fully commissioned warm water underfloor heating systems.
It may also be used over fully cured and dry calcium sulphate screeds.
UltraFloorLevel lT Top is ideal for use in conjunction with Ultra Floor Level IT BASE (see relevant technical datasheet) where product application exceeds 15mm.
UltraFloorLevel IT Top should be applied at a minimum application thickness of 5mm and can be applied up to maximum 15mm.
Coverage
Applied Thickness | Coverage Per Unit | Consumption per 100m2 Area |
---|---|---|
5mm | 3.1 m2 | 33 bags |
10mm | 1.5 m2 | 67 bags |
15mm | 1 m2 | 100 bags |
UltraFloor Level It Top Technical Data
Specification | BS EN 13813:2002 |
Screed Classification | CT-C40-F7-AR0.5 |
Working time at 20oC | 30-40 mins |
Walk on hardness time at 20oC | 2-3 hrs |
Ready to receive fork lift traffic | 36 hrs |
Ready to receive resin coating | 24 hrs |
Compressive Strengths (BS EN 13892-2) | 1 Day: > 25N/mm2 7 Days: > 35N/mm2 28 Days: > 41N/mm2 |
Flexural Strength | 1 Day: 5N/m2 7 Days: 6N/m2 28 Days:7N/m2 |
Abrasion resistance Slip resistance Impact hardness | AR 0.5 PTV60 Dry / PTV 46 Wet 0.8mm (high impact resistance |
Flow properties using 200ml Ultra Floor flow tube | 260-290mm |
Cleaning
Tools should be thoroughly cleaned in water to remove excess materials immediately after use.
Storage
Store in a dry place between 5-30°C. When stored correctly and used within 6 months of the date shown on the bag, the reducing agent activity will be maintained and the product will contain, when mixed with water, no more than 0.0002% (2 ppm) soluble Chromium (VI) of the total dry weight of the cement. Note: The use of this product after the end of the 6 month storage period may increase risk of an allergic reaction.
Download / Brochures: