!FREE DELIVERY on Every Order (Most of Mainland UK) *
Credit/Debit Cards / PayPal / Apple Pay accepted. Contact for Proforma & BACS **
-0%
, , , , ,

ROCATEX C2FT S2 Ultimate Rapid Flex White tile adhesive – Pallet Deals and Bulk Buy

ROCATEX Tile Adhesives, Floor Levelling Compounds & Grouts

ROCATEX C2FT S2 Ultimate Rapid Flex White is:

A White Rapid Set Highly Flexible Adhesive for Tiles & Natural Stone, 20kg.

ROCATEX C2FT S2 Ultimate Rapid Flex White is a single part, highly flexible, rapid setting wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Suitable for interior and exterior use, also as a fast track solution for green screeds.

  • 1 – 20mm bed thickness
  • 45 mins pot life
  • 3 hours set time

Uses:

  • Ceramics, Porcelain, Mosaics
  • Natural stone, Flagstones
  • Screeds, Timber, Chipboard
  • Underfloor heating
  • Swimming pools, Wet areas
  • Ultimate grab, Non-slip
  • Suitable for Green Screeds
  • Interior and Exterior applications

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@buythepallet.co.uk

~ FREE DELIVERY 3-5 Days on ROCATEX ~

[> CLICK HERE TO BUY AS MANY AS YOU WANT ROCATEX C2FT S2 Ultimate Rapid White Discount Calculator <]

£499.00£825.00 +VAT

£499.00 £590.00 +VAT
£685.00 £745.50 +VAT
£825.00 £1,020.50 +VAT
x

ROCATEX C2FT S2 Ultimate Rapid Flex White more information:

Coverage: One 20kg bag will cover approximately 6m2 at 3mm bed thickness.

ROCATEX C2FT S2 Ultimate Rapid Flex White Technical Data:

ConformityConforms to the requirements of BS EN 12004 / 12002 C2FT S2
Tensile strength24 hrs >1.00N/mm2
Transverse deformationClassification S2(deformation greater than 5mm)
Application temperature5°C to 25°C
Service temperature range-20°C to +80°C
Bed thickness1-20mm
Mixing ratio4.8 - 5 litres of clean tap water to 20kg powder
Pot life45 mins at 20°C
Set time3 hrs at 20°C
Ready for grouting3 hrs at 20°C
Fully load bearing24 hrs at 20°C
Shelf life12 months in cool dry area
Sizes20kg
StorageStore unopened in cool dry conditions

Note: All times refer to site conditions of 20°C. These times will be increased at lower temperatures and reduced at elevated temperatures. DO NOT apply if frost is forecast within 24 hours, in wet conditions, in temperatures below 5°C or above 25°C, to areas in direct sunlight or to substrates that are hot.

 

Extended info:

SURFACE PREPARATION

All surfaces must be clean, firm, dry, free from all loose matter including dust, dirt, oil, grease, laitance and any other contaminants that may affect adhesion. All substrates should be prepared to provide a rigid and secure base without deflection and suitable to support the intended weight. New timber should be given time to find equilibrium with its surroundings.

The following information provides further details for preparing various common substrates. Unless stated otherwise, any reference to the term “diluted” means 1 part primer mixed with 1 part clean water.

Anhydrite Screeds – The substrate must not leach moisture. Anhydrite screeds must not have a moisture content greater than 0.5% or 75% relative humidity (RH). This can easily be tested by taking moisture readings across the whole surface. It is essential that surface laitance is removed in accordance with the screed manufacturer’s recommendations, followed by vacuum cleaning to remove any loose material, then apply 2-4 neat coats of ROCATEX Acrylic Primer or 2 diluted coats of ROCATEX Ultimate Grip Primer.

Concrete Screeds – Substrate curing before tiling can commence is approximately 7 days. Do not prime green screed. Cured screed should be primed with 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Power Floated Concrete – Once cured, power floated concrete should be mechanically abraded (scabbled or shot blasted) to remove any curing agents and open up the surface, followed by vacuum cleaning to remove any loose material, then apply 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Sand & Cement Screeds – Substrate curing before tiling can commence is approximately 24 hours. Do not prime green screed. Cured screed should be primed with 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Brick/Blockwork – Please note that new brick/blockwork is prone to drying shrinkage and care must be taken. Allow a minimum of 6 weeks before tiling. Prime with 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Gypsum Plaster – The surface should be roughened up using a wire brush or other abrasive tool as this will remove the surface laitance. Ensure surface is clean and free from loose matter and prime with 2 neat coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer. Substrate curing before tiling can commence is approximately 4 weeks.

Plaster Boards – Skimming is not required. Prime with 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Plywood – Must be a minimum thickness of 15mm, exterior grade, screwed down at 300mm centres and all joints must be supported. Prime the surface with 1 diluted coat of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Tongue & Groove Boards/Floorboards – Must be dry, rigid and securely fixed and screwed to joists at every 300mm. Prime the surface with 1 diluted coat of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Chipboard – Must be a minimum thickness of 22mm, moisture resistant quality, screwed down at 300mm centres and all joints must be supported. Apply 1 neat coat of ROCATEX Acrylic Primer or ROCATEX Ultimate Grip Primer to all exposed edges and joints and then apply either 1 neat coat of ROCATEX Ultimate Grip Primer or a slurry coat to the surface: 1 part cement adhesive powder to 1 part ROCATEX Acrylic Primer, apply a thin coat with a brush and allow to dry.

Cement Based Tile Backer Boards – Must be installed in accordance with manufacturer’s guidelines. Unless stated otherwise, prime with 1 diluted coat of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Existing Tiles & Other Non-Porous Substrates – Apply either 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry or a slurry coat: 1 part cement adhesive powder to 1 part ROCATEX Acrylic Primer, apply a thin coat with a brush and allow to dry.

Metal – Prime the surface with 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry.
Flooring Grade Asphalt – Ensure the surface is in good condition and there are no signs of debonding and/or hollowness. Apply 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry.

Epoxy Damp Proof Membranes – Apply 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry.

Underfloor Heating – Existing underfloor heating must be switched off at least 3 days prior to tiling to allow the substrate to cool. Once tiling has been completed allow 1 week before turning the heating system back on. Start with a low temperature and gradually increase at 5°C per day.

When tiling on to new electric underfloor heating, we recommend the use of a suitable self levelling compound to encase the heat mat, for example ROCATEX Fibreflow Rapid Flex Leveller. Once tiling has been completed allow 1 week before turning the heating system on. Start with a low temperature and gradually increase at 5°C per day.

MIXING

Mix 20kg of ROCATEX C2FT S2 Ultimate Rapid Flex White in a clean mixing vessel with between 4.8 – 5 litres of cold clean tap water until a smooth creamy consistency is achieved using a suitable drill with whisk attachment. Mix at a slow speed for a minimum of 2 minutes to ensure that all ingredients (polymers, retarding agents etc.) are dispersed thoroughly throughout the whole mix.

APPLICATION

The mixed adhesive is applied to the prepared surface and then combed through with a suitably sized notched trowel to create a ribbed adhesive bed. The tiles should be pressed into place with a twisting and sliding action to achieve full adhesive to tile transfer.

For tiling to walls in dry internal locations the adhesive contact should be at least 65% of the back of the tile. When tiling to floors and all external situations, or in wet areas such as showers and swimming pools, or when fixing granite and quartz, solid bed fixing should be achieved. To achieve a solid bed requires the tiles to be buttered immediately prior to placing into the ribbed bed so no voids are left beneath the tiles. The size of the notched trowel chosen depends on the size of the tile, the surface being tiled, the profile on the back of the tile and the degree of coverage area required. Expansion joints must be installed in accordance with the relevant Part of BS 5385. Test open time by touching the adhesive bed with a finger; if adhesive transfers to the finger a safe bond is assured, if not, the adhesive must be removed and replaced with fresh material. Never add water or powder to a mix that has begun to set. Do not apply at substrate temperatures below 5°C or in conditions of extreme heat. Exterior installations must be protected from direct sunlight, wind or rain.

GROUTING

Leave for a minimum of 3 hours before grouting and or walking on the tile. This time may be extended on impervious surfaces. If completing a swimming pool do not fill for at least 3 weeks after grouting.

This information is offered without guarantee. Our Company policy is one of continuous research and development, we therefore reserve the right to update this information at any time without prior notice

Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ROCATEX C2FT S2 Ultimate Rapid Flex White tile adhesive – Pallet Deals and Bulk Buy”

There are no reviews yet.

 

Buy The Pallet - Tile Adhesive and Floor Levellers Discount Store

5.0Out of 5 stars

Overall rating out of 18 Google reviews

Aaron Nairn
a week ago

Fantastic customer service and fast delivery, highly recommend

Gary Dawson
4 months ago

Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.

Phil Down
5 months ago

They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.

Dom
5 months ago

BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value

Gary Harper
7 months ago

Great service, great price and great communications. We will definitely use Buy The Pallet again

Adrian W
9 months ago

Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.

Stephen Tucker
9 months ago

Great customer service and at an unbeatable price. All delivered on the day I needed it.

Boon Teo
9 months ago

Great prices with a good ranges of products . Customer Service is excellent!

Boon Teo
9 months ago

Great prices with a good ranges of products . Customer Service is excellent!

Rob Jones
3 years ago

Companies like this a rare, great quick service, great price and easy to do business with. Will definitely use them again for all my supplies.

phil harvey
4 years ago

First class service, good price, fast delivery and the chap at the end of the phone knew what he was on about. Highly recommend and will use them again.

Peter Bostock
3 years ago

I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend

Kev in
3 years ago

Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive

Richard Fairlie
3 years ago

Great service and really good pricing! Super fast delivery and really lovely guy!

Rob Faulkner
3 years ago

Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.

Max Simpson
10 months ago

Very helpful!

Marc. T
3 years ago

Very helpful

Neil Salih
3 years ago