We Now Reward Your Loyalty On All Member Orders, With Loyalty Points. Use Loyalty Points Against Your Next Order For Money Off -:)
-0%

Rocatex Ultimate Grip Primer

ROCATEX Tile Adhesives, Floor Levelling Compounds & Grouts

ROCATEX Ultimate Grip Primer is:

A Solvent-Free, Rapid Drying, One Coat Bonding Primer, 5 & 10kg

With adhesion enhancing additives. Designed to adhere to even the most problematic non-absorbent surfaces, the rough textured finish promotes maximum bonding when tiling, levelling, screeding and rendering.

  • Multi-Purpose / Easy To Use
  • Ultimate Bond / Textured ‘Key Coat’ Finish
  • Rapid Drying / One Coat Application
  • Very Low Emissions / EC1 Plus (VOC)
  • Non-Absorbent / Absorbent Surfaces
  • Existing Tiles / Asphalt / Bitumen
  • Concrete / Blockwork / Screeds / Timber
  • Interior / Exterior / Domestic / Commercial
  • Units of 5 Kg or 10 Kg

You can add this product to your order, however there must be a pallet/half-pallet in the cart to checkout.

Need a custom deal? 0333 344 2655 or info@buythepallet.co.uk


~ Free Delivery on Pallets & Half-Pallets, 3-5 Working Days ~

£28.95£55.05 +VAT

£28.95 £37.95 +VAT
£55.05 £79.90 +VAT
x

ROCATEX Ultimate Grip Primer further information:

Coverage: Approx. 10m2 per kg.
Depending on the absorbency and nature of the substrate, coverage and drying times will vary.

ROCATEX Ultimate Grip Primer is a solvent-free, rapid drying, one coat bonding primer with adhesion enhancing additives. Designed to adhere to even the most problematic non-absorbent surfaces, the rough textured finish promotes maximum bonding when tiling, levelling, screeding and rendering.

Suitable for interior and exterior use and for non-absorbent and absorbent substrates including; existing tiles, asphalt, bitumen, metal, glass, moisture resistant chipboard, lime and gypsum plaster, plaster boards, concrete, screeds, anhydrite, levelling compounds, cement based rendering and wooden surfaces such as plywood and floorboards.

ROCATEX Ultimate Grip technical information:

FormReady to use liquid
ColourViolet
Density1.3 g/cm3
pH8
Viscosity2000 mPa.s
Solid Contents67%
Drying Time15 to 60 minutes
Application Temp. Range5°C to 25°C
Service Temp. Range-20°C to 80°C
Shelf LifeUp to 12 months when stored in unopened containers, under cool dry conditions. Avoid frost.

SUBSTRATE PREPARATION

All surfaces must be clean, firm, dry, free from all loose matter including dust, dirt, oil, grease, laitance and any other contaminants that may affect adhesion. Residual moisture content should not exceed the following values; Cement – 2%, Anhydrite – 0.5%, Heated Anhydrite – 0.3%, Gypsum Plaster – 1% (measured with CM instrument).

APPLICATION

Stir well prior to use. ROCATEX Ultimate Grip Primer should be used undiluted on non-absorbent surfaces and diluted 1:1 with clean water on absorbent surfaces. Apply evenly with a roller, brush or sponge. Do not over apply as this can cause the primer to form a skin, only a thin coat should be applied. The primer should not be applied to substrates with a temperature of less than 5°C or above 25°C. Please note that anhydrite requires two diluted coats.

On non-absorbent surfaces and anhydrite, the primer should be fully dry before next works can commence. Typically this will take between 15-60 minutes. Drying times will vary depending on site conditions. On absorbent surfaces, levelling and tiling can commence whilst the diluted primer is still wet.

The following information provides details for priming various common substrates. Unless stated otherwise, any reference to the term “diluted” means 1 part primer mixed with 1 part clean water.

Existing Tiles & Other Non-Porous Substrates – Apply 1 neat coat of ROCATEX Ultimate Grip Primer. Metal – Apply 1 neat coat of ROCATEX Ultimate Grip Primer.

STORAGE

Store unopened, clear of the ground in a cool, dry, frost free environment. Shelf life is 12 months from date of manufacture. A small amount of liquid may form on the surface of the material, this can be readily remixed by stirring. If the container is left open for a period of time a skin will form over the material. This skin should be removed and not mixed into the product.

SKU: 002003001 Category:
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rocatex Ultimate Grip Primer”

There are no reviews yet.