Sikafloor 132 Rapid Self Levelling Compound extended information
Environmental
Created with a low cement formulation, using supplementary cementing materials for a more environmentally friendly option.
Standards
Sikafloor 132 Rapid Self Levelling conforms to the requirements of EN13813 CT-C35-F7.
Uses
- Sikafloor 132 Level Rapid is not designed as a final wearing surface and must be covered with a floor covering.
- Not to be used on flexible or unstable substrates.
- Do not use over vinyl coverings, insulation/building boards, anhydrite screeds etc.
- Not suitable for use over large areas of internal timber floors.
- Do not use on floors with rising damp.
- Do not use as a DPM.
- Porous substrates must be sealed to prevent pin holing and cracking.
- Never exceed water quantity stated.
- Do not add any other materials to the mix.
- Do not use externally (for internal use only).
- Do not use for embedding underfloor heating systems.
- Suitable for use with underfloor heating applications beneath heating systems, with maximum surface temperature of +27 0C.
- For substrate or technical advice please contact 08081 410 715
Sikafloor 132 Rapid Self Levelling Compound Application Instructions
- Concrete/screed should be at least 28 days old.
- The surface must be dry, clean, structurally sound and possess an effective damp proof membrane.
- The surface should be free from residual adhesives, oil, grease, wax, loose flaky paint, dust, laitance etc. that could reduce adhesion.
- Mix Sikafloor 132 Level Rapid with water as directed and apply to the primed sub floor.
- Always add Sikafloor 132 Level Rapid to water, not the other way around.
- Ensure floor temperature is ≥5 °C.
- Switch off underfloor heating at least 48 hours before, and for 48 hours after, application.
Sikafloor 132 Rapid Self Levelling Compound product information
Packaging | 16 kg Bag |
Shelf Life | 6 Months. |
Storage Conditions | Material should be stored under cover, off the ground and in dry condi- tions (between +5 °C and +35 °C). Use of this product after the end of the declared storage period may increase the risk of allergic reaction. |
Appearance / Colour | Grey Powder. |
Density | ca 2.0 kg/L (fresh mortar) |
Technical information
Compressive Strength | >35 N/mm2 (after 28 days / +20 °C EN13892-2) |
Flexural Strength | >7 N/mm2 (after 28 days / +20 °C EN13892-2) |
Sikafloor 132 Rapid Self Levelling Compound application information
Yield | 16 kg powder covers approx. 3 m2 at a depth of 3 mm. 1.79 kg powder / m2 / mm. |
Layer Thickness | 2 mm to 10 mm. |
Ambient Air Temperature | +5 °C to +25 °C. |
Relative Air Humidity | 75 % max. |
Mixing Ratio | 2.6 to 2.8 litres of water required per 16 kg bag. |
Substrate Temperature | +5 °C to +25 °C. |
Pot Life | 5-10 mins approx. after mixing at 20 °C. |
Setting time | 30 mins for foot traffic (3 mm thickness at +20 °C). |
Waiting Time / Overcoating | Loose lay flooring from 45 mins. (3 mm thickness at +20 °C). |
Bonded floor coverings from 3 hours. (3 mm thickness at +20 °C). NOTE: Values are approximate, thickness and temperature may affect properties. When overcoating Sikafloor®-132 Level Rapid always ensure the moisture content has achieved the required value for the coating product, as the waiting time will vary with the application thickness and ambient humidity (refer to the product data sheet of the over/ top coat product). |
There are no reviews yet.