Larsen Impregnating Sealer extended information
FORM | Liquid |
COLOUR | Clear to Pale Amber |
HAZARD INFORMATION: | FLAMMABLE – Consult Safety Datasheet before use. Contains: White Spirit VOC content less than 750g/L |
CLEANING: | Clean tools, equipment, etc. using white spirit or thinners. |
PACKAGING | 1L Plastic Containers |
STORAGE CONDITIONS: | Store in sealed containers in dry conditions, protected from extremes of temperature |
SHELF LIFE: | 12 months in unopened manufacturer’s packaging |
Larsen Impregnating Sealer APPLICATION INFORMATION
APPLICATION TEMPERATURE: | +3°C to +30°C |
COVERAGE: | 2-10 m2/L depending on dilution |
EXPECTED LIFE: | 3 - 5 years depending on traffic, etc. |
DIRECTIONS FOR USE:
NOTE
While Larsen Impregnating Sealer is suitable for almost all porous surfaces, it is recommended to always test on an inconspicuous area first to ensure suitability for use. Particular care should be taken to protect the surrounding surfaces.
SUITABILITY
Suitable for use on slate, quarry tiles, certain types of natural stone, unglazed ceramics and cement based grout.
DIRECTIONS
Larsen Impregnating Sealer is supplied ready for use, do not further dilute. Surface to be treated should be clean, free from staining and contamination. Any existing stains will be almost impossible to remove following treatment. If the floor has been cleaned recently allow surface to dry for 3 days. (Underfloor heating should be switched off 24 hours prior to application.) Apply in a thin layer uniformly with a cloth, brush or sponge and allow to penetrate for approximately 15-30 minutes. Then remove all excess product from the surface with a clean lint-free cloth. Very porous surfaces may require further treatments as above. Should any product remain on the surface, remove by further buffing with a clean cloth. Surface can be walked on after 6 hours and fully trafficked after 2-3 days.
There are no reviews yet.