Designed for use in the refurbishment of existing floors in both commercial and domestic applications, it can be hand or pump applied.
Can be used from 3-40mm on:
Suitable for use with underfloor heating and for encapsulating electric cable undertile heating systems.
** Owing to the incredible value (very low margin for us) of Mapei 3240 Renovation Screed BTP Loyalty Points are excluded from product **
[> CLICK HERE TO BUY AS MANY AS YOU WANT <] 
A White Slow Set Adhesive for Tiles & Natural Stone, 20kg.
ROCATEX C2TE S1 is a single part, flexible wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Suitable for interior and exterior use.
Uses:
ARDEX A 38 produces ultra-rapid drying floor screeds which can be walked on after just 3 hours, and have floorcoverings installed in as little as 4 hours, regardless of thickness.
Use ARDEX A 38 for bonded, unbonded and floating screeds in internal and external locations, including wet areas such as swimming pools.
Interlock your gravel driveway or glass driveway, with IBRAN grids, to make it stronger for all weather use.
Ronadeck Resin Bound Surfacing resin is a two-part polyurethane resin used to bind kiln-dried aggregates together to form a highly decorative, permeable surface. It is UV stable in typical UK conditions and is formulated and manufactured at our production facility in Essex. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The surfacing may be applied to SuDS compliant bases and sub-bases, reducing the impact of urban development on flood risk and allowing water to flow into water courses.
Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.
Included in the kits
RonaDeck Resin Bound Surfacing Resin is a two-part polyurethane resin and is used to create a highly decorative, permeable surface by binding kiln-dried aggregates together. It is manufactured in Essex and is UV stable in the typical UK conditions. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains reducing the impact of urban development on flood risk and allowing water to flow into water courses when applied to a SuDS compliant base and sub-base.
The minimum application thickness is 15 mm for foot traffic and 18 mm for driveways, when combined with kiln-dried aggregates that are no bigger than 6 mm in diameter.
ARDEX P 4 is a ready mixed primer for use on absorbent and non-absorbent backgrounds in internal and external locations. It produces a textured surface that is especially effective in facilitating the adhesion of cement-based tile adhesives in tile-on-tile applications.
ARDEX P 4 Primer can be used on internal and external walls, ceilings and floors. The consistency has been optimised so that dripping and splashes are virtually eliminated. For use prior to the installation of ARDEX tile adhesives and floor-levelling compounds. It produces a textured grip which facilitates tile on tile application, eliminating the risk of adhesives slipping when being applied to smooth surfaces.
Kerakoll Proflow Finish’s advanced formulation allows for complete control under the trowel whilst maintaining high flow properties, exceptional repair properties, extended working and wet edge time and delivers a flawless surface finish upon drying.
Kerakoll Proflow Trade has been formulated in order to guarantee maximum compatibility and adhesion with all kinds of organic adhesives for resilient floor coverings.
EVERBUILD EVERCRYL ONE COAT is a resin based, fibre re-enforced* roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces. May also be applied in frosty conditions down to –5 °C. It is instantly waterproof when applied, so there is no fear of wash off, so emergency leaks can be tackled immediately as there is no need to wait for the rain to stop. It is brush applied and dries to a smooth seamless flexible membrane. The high level of fibre re-enforcement* in it means it will bridge small cracks and requires only a one-coat brush application to give instant and total water protection. EVERBUILD EVERCRYL ONE COAT works even in areas subject to ponding. It requires no primer on sound non-porous surfaces.
Sikafloor 245 Level Deep Fill Ultra Self Levelling Compound is a one-part, thick bed cement-based smoothing and resurfacing compound for levelling out extremely uneven floors and screeds down to a depth of 50mm in one coat.
It is typically used for levelling floors prior to laying ceramic and thermoplastic tiles, lino, wood block flooring or carpet. When mixed as directed, the compound provides a free flowing/trowelable mix.
Characteristics / Advantages
Suitable for internal and external use
[> EASY PALLET PRICING <]
Sikafloor 440 Level Fibre Reinforced is a fibre and polymer reinforced, flexible, high strength cement based levelling compound, designed specifically for use with underfloor heating and for application over wooden floors. Once mixed with water, Sikafloor 440 Level Fibre Reinforced produces a smooth self-levelling compound which dries to a tough flexible finish which may then be overlaid with most common floor coverings or left as a final wearing surface.
Uses
[> EASY PALLET PRICING <]
Sikafloor 132 Level Rapid is a 1-part, cementitious, polymer-modified, fast setting, smoothing and levelling compound for uneven rigid internal floors and ideal for applications where same day covering is required. Suitable for use with many flooring finishes such as carpets, vinyl, wood block flooring, ceramic tiles and laminate flooring.
Can be laid over most common substrates:
[> EASY PALLET PRICING <]
The formulation of Kerakoll Levelflex Fibre ensures optimal compatibility and adherence with all types of ceramic, porcelain, natural stone, and mosaic tiles.
[> EASY PALLET PRICING <]
Kerakoll Levelflex External is ideal for use in wet areas and swimming pools as part of the Kerakoll swimming pool system. Levelflex External, which may be left uncovered to serve as a wearing surface, is perfect for smoothing surfaces before tiling. It is specially formulated to retain performance while submerged. Levelflex External is ideal for smoothing surfaces prior to tiling and can be left uncovered as a wearing surface.
[> EASY PALLET PRICING <]
Ronadeck Resin Bound Surfacing resin is a two-part polyurethane resin used to bind kiln-dried aggregates together to form a highly decorative, permeable surface. It is UV stable in typical UK conditions and is formulated and manufactured at our production facility in Essex. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The surfacing may be applied to SuDS compliant bases and sub-bases, reducing the impact of urban development on flood risk and allowing water to flow into water courses.
Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.
Included in the kits
RonaDeck Resin Bound Surfacing Resin is a two-part polyurethane resin and is used to create a highly decorative, permeable surface by binding kiln-dried aggregates together. It is manufactured in Essex and is UV stable in the typical UK conditions. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains reducing the impact of urban development on flood risk and allowing water to flow into water courses when applied to a SuDS compliant base and sub-base.
The minimum application thickness is 15 mm for foot traffic and 18 mm for driveways, when combined with kiln-dried aggregates that are no bigger than 6 mm in diameter.
ARDEX P 4 is a ready mixed primer for use on absorbent and non-absorbent backgrounds in internal and external locations. It produces a textured surface that is especially effective in facilitating the adhesion of cement-based tile adhesives in tile-on-tile applications.
ARDEX P 4 Primer can be used on internal and external walls, ceilings and floors. The consistency has been optimised so that dripping and splashes are virtually eliminated. For use prior to the installation of ARDEX tile adhesives and floor-levelling compounds. It produces a textured grip which facilitates tile on tile application, eliminating the risk of adhesives slipping when being applied to smooth surfaces.
Kerakoll Proflow Finish’s advanced formulation allows for complete control under the trowel whilst maintaining high flow properties, exceptional repair properties, extended working and wet edge time and delivers a flawless surface finish upon drying.
Kerakoll Proflow Trade has been formulated in order to guarantee maximum compatibility and adhesion with all kinds of organic adhesives for resilient floor coverings.
EVERBUILD EVERCRYL ONE COAT is a resin based, fibre re-enforced* roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces. May also be applied in frosty conditions down to –5 °C. It is instantly waterproof when applied, so there is no fear of wash off, so emergency leaks can be tackled immediately as there is no need to wait for the rain to stop. It is brush applied and dries to a smooth seamless flexible membrane. The high level of fibre re-enforcement* in it means it will bridge small cracks and requires only a one-coat brush application to give instant and total water protection. EVERBUILD EVERCRYL ONE COAT works even in areas subject to ponding. It requires no primer on sound non-porous surfaces.
Sikafloor 245 Level Deep Fill Ultra Self Levelling Compound is a one-part, thick bed cement-based smoothing and resurfacing compound for levelling out extremely uneven floors and screeds down to a depth of 50mm in one coat.
It is typically used for levelling floors prior to laying ceramic and thermoplastic tiles, lino, wood block flooring or carpet. When mixed as directed, the compound provides a free flowing/trowelable mix.
Characteristics / Advantages
Suitable for internal and external use
[> EASY PALLET PRICING <]
Sikafloor 440 Level Fibre Reinforced is a fibre and polymer reinforced, flexible, high strength cement based levelling compound, designed specifically for use with underfloor heating and for application over wooden floors. Once mixed with water, Sikafloor 440 Level Fibre Reinforced produces a smooth self-levelling compound which dries to a tough flexible finish which may then be overlaid with most common floor coverings or left as a final wearing surface.
Uses
[> EASY PALLET PRICING <]
Sikafloor 132 Level Rapid is a 1-part, cementitious, polymer-modified, fast setting, smoothing and levelling compound for uneven rigid internal floors and ideal for applications where same day covering is required. Suitable for use with many flooring finishes such as carpets, vinyl, wood block flooring, ceramic tiles and laminate flooring.
Can be laid over most common substrates:
[> EASY PALLET PRICING <]
The formulation of Kerakoll Levelflex Fibre ensures optimal compatibility and adherence with all types of ceramic, porcelain, natural stone, and mosaic tiles.
[> EASY PALLET PRICING <]
Kerakoll Levelflex External is ideal for use in wet areas and swimming pools as part of the Kerakoll swimming pool system. Levelflex External, which may be left uncovered to serve as a wearing surface, is perfect for smoothing surfaces before tiling. It is specially formulated to retain performance while submerged. Levelflex External is ideal for smoothing surfaces prior to tiling and can be left uncovered as a wearing surface.
[> EASY PALLET PRICING <]
Kerakoll Levelflex Gel’s variable rheology and viscosity allows for exceptional control under the trowel that can be adapted to meet the specific requirements of your project. Whether a flowable self-smoothing layer is required or a more robust trowelable self-levelling application, Kerakoll Levelflex Gel delivers outstanding results every time.
Greenbuilding Rating: 4
[> EASY PALLET PRICING <]
The purpose of creating Kerakoll Levelflex Rapid is to ensure a real fast-track installation solution. In about thirty minutes, it is prepared to receive foot traffic. Also after 30 minutes, Levelflex Rapid is ready to accept any sort of ceramic, porcelain, natural stone, or mosaic tile.
The Keter Factor 8 x 6 garden shed has a stylish wood-like appearance and is composed of a sturdy, weather-resistant resin with steel reinforcement and a robust flooring. It has many features that make it an elegant addition to any garden and the perfect outdoor storage solution. These features include wide double doors with a lockable option, a skylight and window, a high ceiling with two shelves for off-the-floor storage space, and built-in ventilation. Simple setup; a sophisticated yet useful addition to any house or yard.
For added piece of mind, the Keter Factor 8×6 Shed is made to be locked with a normal padlock (not provided). It is made of sturdy, weather-resistant resin and steel reinforcing, making it almost maintenance-free and fade-free. To keep it appearing brand new, all that is needed is the occasional light wash. The Keter Factor Shed 8 × 6 is intended for self-assembly by those with minimal DIY experience.
Made of sturdy resin, the Keter Factor 8×6 ft Shed is built to last. This shed not only lasts for many years, but it also requires very little upkeep. Keter sheds defy all weather conditions and don’t fade. Your Keter shed can appear like new every year with just a simple wash.
A medium-sized outdoor storage option for the garden, the Keter Factor 6 x 6 garden shed is perfect for storing anything from furniture to bicycles to garden tools and equipment. Double doors that open wide make it easy to access the contents, and the shed’s skylight and built-in window, which can be found on either side, let in plenty of natural light. In order to facilitate air circulation and avoid condensation and moisture accumulation, there are additional air vents. Two shelves and brackets are included with the 6 x 6, and a sturdy floor keeps moisture and unwelcome critters out.
For added piece of mind, the Keter Factor 6×6 Shed is made to be locked with a normal padlock (not provided). It is made of sturdy, weather-resistant resin and steel reinforcing, making it almost maintenance-free and fade-free. To keep it appearing brand new, all that is needed is the occasional light wash. The Keter Factor Shed 6 × 6 is intended for self-assembly by those with minimal DIY experience.
Genesis offers this Straight Edge Tile Trim, designed to protect corners avoiding the unsightly and fragile 45 degree cut. The defined square edge clearly outlines coverings such as rectified porcelain stoneware.
*Aluminium’s usefulness as the preferred material may be affected by chemical or mechanical stresses, and alternative materials may be more appropriate given the circumstances needed for industrial settings.
** No pallet required on Genesis Tile Trims – you can add to an order or order by themselves.
With the GrabRake, you can maximise the potential of your outdoor projects. From leaf heaps to garden cleanup, this multifunctional tool streamlines your responsibilities and enriches your gardening or landscaping experience. It is an essential addition to your collection of outdoor tools due to its effectiveness and ease.
Today, discover the difference.
GrabRake will change your debris handling methods, one grab at a time.
EVERBUILD CEMSTRIP is a new type of cement, concrete and mortar stain remover that provides a more environmentally-friendly alternative to conventional hydrochloric acid based cement removers. It will also remove salts and efflorescence from the surface of mineral substrates and is a very effective general cleaner for removing ingrained dirt, grease and stains from paths and patios. It’s a highly concentrated formula that can be diluted up to 10 times with water to suit a variety of applications. Unlike hydrochloric acid based products EVERBUILD CEMSTRIP can be safely used on most metal surfaces such as tools, cement mixers and other building equipment.
Usage
Sika Brick & Patio Cleaner is a fast acting, acid based cleaning solution for brickwork, concrete and paving. Easy to use, powerful formula dissolves mortar and cement stains, ingrained dirt, efflorescence and most paints on mineral surfaces such as brick, stone and paving slabs.
Usage:
Fantastic customer service and fast delivery, highly recommend
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service, great price and great communications. We will definitely use Buy The Pallet again
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
Great customer service and at an unbeatable price. All delivered on the day I needed it.
Great prices with a good ranges of products . Customer Service is excellent!
Great prices with a good ranges of products . Customer Service is excellent!
Companies like this a rare, great quick service, great price and easy to do business with. Will definitely use them again for all my supplies.
First class service, good price, fast delivery and the chap at the end of the phone knew what he was on about. Highly recommend and will use them again.
I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend
Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive
Great service and really good pricing! Super fast delivery and really lovely guy!
Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.
Very helpful!
Very helpful
