We Now Reward Your Loyalty On All Member Orders, With Loyalty Points. Use Loyalty Points Against Your Next Order For Money Off -:)
, ,

ROCATEX Fibreflow Rapid Flex Leveller – Self Levelling Screed Pallet Deals 40x25Kg bags GREY

ROCATEX Tile Adhesives, Floor Levelling Compounds & Grouts

ROCATEX Fibreflow Rapid Flex Leveller is:

Hi-Flow Smooth Finish Self Levelling Screed 3-50mm, 25kg.

ROCATEX Fibreflow Rapid Flex Leveller is a free flowing, rapid setting, fibre reinforced, highly flexible self levelling smoothing screed, blended from a mixture of the highest quality raw materials.

  • 3-50mm bed thickness
  • 25-30 mins open time
  • 90 mins foot traffic
  • High flow rate / easily pumped
  • Wet edge technology / seamless gelling
  • Rapid drying / High flexural strength
  • Durable finish / non shrink
  • Fibre reinforced /protein free
  • Underfloor heating
  • Concrete / Screeds / Timber Floors
  • Tiling / vinyl / soft floor coverings

** OWING TO MATERIAL SHORTAGES IN MANUFACTURING WE ARE NOT ABLE TO SHIP THIS PRODUCT AT THIS MOMENT**

** IF YOU WOULD LIKE AN UPDATE ON AVAILABILITY PLEASE CALL OR EMAIL US **

RECOMMENDED ALTERNATIVES
Click here -> ROCATEX Tradeflow Fibre Flex Leveller

(new product)

ROCATEX Fibreflow Rapid Flex Leveller more information:

Coverage: For every 1mm thickness 1.62kg of dry powder per square metre will be required, i.e. 1m2 at 10mm thickness will require 16.2kg of dry powder.
ROCATEX Wet Edge Technology promotes seamless gelling between pours, ensuring a perfect surface and finish every time. Its rapid set time allows for light foot traffic after approximately 90 minutes.

ROCATEX Fibreflow can be applied in thicknesses from 3-50mm in a single pour. It provides an economic means of levelling and renovating existing interior floors prior to the installation of floor coverings including ceramic and porcelain tiles, natural stone, timber, vinyl and carpet.

It is particularly effective for encasing underfloor heating systems where its thermal transfer properties enhance the heating application. ROCATEX Fibreflow is suitable for use in domestic, commercial and industrial environments.

ROCATEX Fibreflow Rapid Flex Leveller  technical information:

ConformityConforms to the requirements of BS EN 13813 CT C30 F9
Application temperature6oC to 25oC
Bed thickness3-50mm
Mixing ratio6 litres of water to 25kg of powder
Open time25-30 minutes at 20oC
Foot traffic90 mins hours at 20oC
Pump applicationYes
Flow ring values235-255mm (65mm Ø, 40mm high flow ring)
Protein freeYes
ColourGrey
Shelf life12 months in cool dry area72 hrs at 20°C
Size25Kg

SURFACE PREPARATION
All surfaces must be clean, firm, dry, free from all loose matter including dust, dirt, oil, grease, laitance and any other contaminants that may affect adhesion. All substrates should be prepared to provide a rigid and secure base without deflection and suitable to support the intended weight. New timber should be given time to find equilibrium with its surroundings.

The following information provides further details for preparing various common substrates. Unless stated otherwise, any reference to the term “diluted” means 1 part primer mixed with 1 part clean water.

Anhydrite Screeds – The substrate must not leach moisture. Anhydrite screeds must not have a moisture content greater than 0.5% or 75% relative humidity (RH). This can easily be tested by taking moisture readings across the whole surface. It is essential that surface laitance is removed in accordance with the screed manufacturer’s recommendations, followed by vacuum cleaning to remove any loose material, then apply 2-4 neat coats of ROCATEX Acrylic Primer or 2 diluted coats of ROCATEX Ultimate Grip Primer.

Concrete Screeds – Prime with 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer. Substrate curing before levelling can commence is approximately 6 weeks..

Power Floated Concrete – Once cured, power floated concrete should be mechanically abraded (scabbled or shot blasted) to remove any curing agents and open up the surface, followed by vacuum cleaning to remove any loose material, then apply 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Sand & Cement Screeds – Prime with 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer. Substrate curing before levelling can commence is approximately 3 weeks.

Plywood – Must be a minimum thickness of 15mm, exterior grade, screwed down at 300mm centres and all joints must be supported. Prime the surface with 1 diluted coat of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Tongue & Groove Boards/Floorboards – Must be dry, rigid and securely fixed and screwed to joists at every 300mm. Prime the surface with 1 diluted coat of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Chipboard – Must be a minimum thickness of 18mm screwed down at 300mm centres and all joints must be supported. Apply 1 neat coat of ROCATEX Acrylic Primer or ROCATEX Ultimate Grip Primer to all exposed edges and joints and then apply either 1 neat coat of ROCATEX Ultimate Grip Primer or a slurry coat to the surface: 1 part cement adhesive powder to 1 part ROCATEX Acrylic Primer, apply a thin coat with a brush and allow to dry.

Cement Based Tile Backer Boards – Prime the surface with 1 diluted coat of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer.

Existing Tiles & Other Non-Porous Substrates – Apply either 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry or a slurry coat: 1 part cement adhesive powder to 1 part ROCATEX Acrylic Primer, apply a thin coat with a brush and allow to dry.

Flooring Grade Asphalt – Ensure surface is in good condition and there are no signs of debonding and/or hollowness. Apply 1 neat coat of ROCATEX Acrylic Primer or 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry. N.B. No single pour should be deeper than 6mm.

Epoxy Damp Proof Membranes – Apply 1 neat coat of ROCATEX Ultimate Grip Primer and allow to dry.

Underfloor Heating Systems – Existing underfloor heating must be switched off at least 3 days prior to applying ROCATEX Fibreflow to allow the substrate to cool. Once application has been completed allow 1 week before turning the heating system back on. Start with a low temperature and gradually increase at 5°C per day.

Electric Underfloor Heating – When encasing new electric underfloor heating, the system must be turned off. Allow 1 week before turning the heating system back on. Start with a low temperature and gradually increase at 5°C per day.

Heated Screeds – Prior to applying ROCATEX Fibreflow, underfloor heated screeds should be commissioned in line with the heating system/screed guidelines. The heating system must be switched off at least 3 days prior to application to allow the substrate to cool. Once application has been completed allow 1 week before turning the heating system back on. Start with a low temperature and gradually increase at 5°C per day.

Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ROCATEX Fibreflow Rapid Flex Leveller – Self Levelling Screed Pallet Deals 40x25Kg bags GREY”

There are no reviews yet.