Everbuild 407 Mortar Stain Remover – Pallet Deals and Bulk Buy

Everbuild 407 Mortar Stain Remover extended information

Yield: 1 Litre (neat) will clean approximately 10m? depending on porosity of sur face, type and quantity of surface stain.

USES

• Cleans stains from brickwork, some natural stone, concrete and earthenware.
• Cleans stains from patios.
• Cleans garage and factory floors.

CHARACTERISTICS and ADVANTAGES

• Acid based – powerful cleaning action
• Water clean up
• Economical in use

Everbuild 407 Mortar Stain Remover PRODUCT INFORMATION

Everbuild 407 Mortar Stain Remover APPLICATION INSTRUCTIONS

SUBSTRATE PREPARATION

May be applied to dirty and damp surfaces.

APPLICATION METHOD / TOOLS

Always wear impervious gloves, boots, coveralls and face shield/goggles during use. Before applying, wet the area in question with water and try an inconspicuous area for compatibility prior to full application. Cleaning brickwork: Use neat. Pour the required amount of cleaner into a PLASTIC CONTAINER (do not use metal containers) and apply using a scrubbing brush or a stiff bristle paint brush, working well into the substrate. Leave the solution for 20 mins, then scrub with clean cold water until the surface is clean. Repeat application for extremely stubborn stains. Finally, flood treated areas with cold water after use.

Cleaning patios: Use a 1:1 dilution with water (always add acid to water) and apply and rinse as above, testing an inconspicuous area prior to full application

LIMITATIONS

• Always read label before use and wear suitable protective equipment
• Take care when working on interior surfaces and with artificial stone.
• ALWAYS test a small area before applying to the entire surface. On very sensitive surfaces, a 1:1 dilution
  as a trial is recommended.
• Always wash the surface down after treatment.
• Protect plants and animals from contact when using.
• Care must be taken with natural stones as this product can cause carbonation.