Larsen Multipurpose Silicone extended information
FORM | Paste |
COLOURS: | Clear, White, Brown, Grey Black |
SPECIFIC GRAVITY: | 0.94 g/ml |
MOVEMENT: | +/-25% |
SKINNING TIME: | 5 - 10 min @ 20°C |
APPLICATION TEMP: | +5to+30°C |
TEMP RESISTANCE: | -50 to + 120°C |
HARDNESS SHORE A: | 10 |
100% MODULUS: | 0.15 MPa |
ELONGATION AT BREAK: | 800% |
MINIMUM JOINT WIDTH: | 4 mm |
MAXIMUM JOINT WIDTH: | 25 mm |
COVERAGE: | Joint / Linear Metres 5x5mm / 11 10x10mm / 3 10x20mm / 1.5 |
Larsen Multipurpose Silicone DIRECTIONS FOR USE:
PREPARATION
Surfaces to be sealed must be clean, dry, sound and free from dust, oil or grease. Primer is not required on clean glass, ceramics and enamelled surfaces.
APPLICATION
Remove cartridge tip with a sharp knife. Cut nozzle to required size and angle. Using a skeleton gun, apply sealant continuously, ensuring full contact with all surfaces. Larsen Multipurpose Silicone should be tooled within five minutes. Soapy water will assist finishing process.
RESTRICTIONS
Larsen Multipurpose Silicone cannot be over-painted. It is not recommended for aquaria, on concrete, marble, lead, copper, galvanized steel and not for PE, PP, Teflon and bituminous or wax containing surfaces. It is not recommended for direct contact with the perimeter of isolation glass and the edges of laminated safety glass. Adhesion tests prior to application are recommended. It is the user’s responsibility to determine suitability.
CLEANING
Clean tools directly after use with white spirit; wash hands with soap and hot water.
STORAGE
Store in manufacturer’s containers in a cool, dry, and frost-free place.
SHELF LIFE
12 months in manufacturer’s unopened containers.
Larsen Multipurpose Silicone PACKAGING
290ml cartridges.
There are no reviews yet.