Everbuild Creocote – Pallet Deals & Bulk Buy – Oil Based Exterior Timber Treatment

Everbuild Creocote extended information

EVERBUILD Creocote can be applied by brush, spray or dip methods. Ensure that all timbers are structurally sound, dry and free from surface growths. Care should be taken to protect valuable plants and foliage during application. Timber previously treated with Creosote, Creosote Substitute or a solvent based wood preservative will readily accept re-treatment with EVERBUILD Creocote. Sealed or painted timbers must be stripped back to bare wood before coating with this product. To ensure suitability it is recommended that test patches are applied before general application. Apply liberally, soaking the timber to achieve best results. Always ensure that end-grain timbers are fully saturated. For timbers being set in the ground, apply Everbuild Bitumen Paints to protect against ground- water saturation. Children and pets should be kept away from treated timber until they are completely dry. A deeper colour may be attained by applying further treatments.

Everbuild Creocote product information

Everbuild Creocote application information

Depending upon the texture and porosity of the timber to be treated, application of a single coat of EVERBUILD Creocote will cover at the rate of 1 litre per 6 to 8 square meters.

Limitations

• Ready to use – do not dilute.
• For External use only.
• Do not use on painted or sealed wooden surfaces.
• It is the user’s responsibility to determine suitability for use. If in doubt, contact Technical Services Department for advice