-0%
, , ,

Palace Extra-Lite Standard Set S1 Wall and Floor Tile Adhesive – Pallet Deals – 108 x 10Kg bags (Grey / White)

Palace

Palace Extra-Lite Standard Set Wall & Floor tile adhesive is:

An ultra-lightweight, thin & thick-bed, flexible floor and wall tile adhesive available in White & Grey. It incorporates recycled low density blown glass to give a high-yield, easy to apply adhesive mortar with 50% reduced weight loading, suitable for fixing all types of tiling, including large format tile & stone. PALACE EXTRA-LITE STANDARD SET gives an extended working pot life of up to 4 hours and sets within 24 hours to allow grout application to proceed the next day.

  • Ultra-Light adhesive for easier application
  • 3 hour pot-life with extended open time
  • S1 Deformable for vibration tolerance
  • Internal/external use and on heated sub-floors
  • Reduced environmental impact as it contains more than 33% recycled material
  • Up to 15mm thick-bed with 50% reduced weight per square metre covered
  • Each bag of Palace Extra-Lite is 10Kg

£1,479.00 +VAT

£1,479.00 £1,709.79 +VAT
x

Palace Extra-Lite Standard Set more information:

Coverage: When fixing on a level, even surface using a 10mm notched trowel, PALACE EXTRA-LITE STANDARD SET will cover at a rate of about 2.0kg per sq. mtr for heavy-duty, studded tiles. When applying wall tiles, the product will cover at about 1.3 kg per sq. mtr using a 6mm notched trowel.

PALACE EXTRA-LITE is an ultra-lightweight, thin & thick-bed, flexible tile adhesive available as either a FAST or a STANDARD setting mortar in White. It gives a high-yield, easy to apply paste with 50% reduced weight loading, suitable for fixing all types of tiling, including large format tile & stone. EXTRA-LITE STANDARD has a 3-hour working pot-life and is ready to grout over the next day. EXTRA-LITE standard set adhesives meet the performance requirements of EN12004 C2TE-S1 and its lightweight, polymer fortified flexibility is ideal where slight movement or vibration is anticipated or on surfaces where sub-floor heating is installed.

Palace Extra-Lite Standard Set technical information:

Unit size10 Kg
ColoursGrey / White
Mean bed depthUp to 15mm
Time till ready to grout24 hours*
Working pot life4 hours*
Initial set time12 - 16 hours *
Application temperatures5 - 35C

Wall Tiles substrate load limits

DescriptionKg/M2
Gypsum plaster (sealed with Tilers Primer)20.0
Gypsum plasterboard (12.5 mm)32.0
Cement / sand rendering & ConcreteNo limit
Lightweight foam-cored tile backer boards60.0
Glass reinforced cement-based boards50.0
Gypsum fibreboards40.0
Other rigid tile backer boardsConsult the manufacturer

Approved receiving surfaces:

  • Concrete
  • Sand/cement screed
  • Tile backer boards
  • Cement faced fibre boards
  • Anhydrite /gypsum-based screeds
  • Firm and stable plaster (sealed with TILERS PRIMER)
  • Plasterboard
  • Sand/cement render
  • Concrete brick/block• Must be securely fixed
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Palace Extra-Lite Standard Set S1 Wall and Floor Tile Adhesive – Pallet Deals – 108 x 10Kg bags (Grey / White)”

There are no reviews yet.