Larsen Stone & Grout Protector extended information
FORM | Liquid |
COLOUR: | Pale Amber |
HAZARD INFORMATION: | IRRITANT – Consult Safety Datasheet before use. Contains: <5% Fluoropolymers |
CLEANING | Clean tools, equipment, etc. using warm water. |
PACKAGING: | 1L Plastic Containers |
STORAGE CONDITIONS: | Store in sealed containers in dry conditions, protected from extremes of temperature |
SHELF LIFE: | 12 months in unopened manufacturer’s packaging |
Larsen Stone & Grout Protector application information
APPLICATION TEMPERATURE: | +3°C to +30°C |
COVERAGE | 5-10 m2/L depending on dilution |
EXPECTED LIFE: | 5 - 10 years depending on traffic, etc. |
DIRECTIONS FOR USE:
NOTE
While Larsen Stone & Grout Protector is suitable for almost all porous surfaces, it is recommended to always test on an inconspicuous area first to ensure suitability for use. Particular care should be taken to protect the surrounding surfaces.
SUITABILITY
Suitable for use on almost all porous substrates and types of natural stone.
DIRECTIONS
Supplied ready for use, do not further dilute. Surface to be treated should be clean, free from staining and contamination. Any existing stains will be almost impossible to remove following treatment. If the floor has been cleaned recently allow surface to dry for 3 days. (Underfloor heating should be switched off 24 hours prior to application.)
Apply in a thin layer uniformly with a cloth, brush or sponge and allow to penetrate for approximately 15-30 minutes. Then remove all excess product from the surface with a clean lint-free cloth. Very porous surfaces may require further treatments as above. Should any product remain on the surface, remove by further buffing with a clean cloth. Surface can be walked on after 6 hours and fully trafficked after 2-3 days.
There are no reviews yet.