Larsen Clean & Shine extended information
PRODUCT INFORMATION
FORM: | Liquid |
COLOUR: | Hazy / White |
FRAGRANCE: | FRESH |
HAZARD INFORMATION: | IRRITANT – Consult Safety Datasheet before use. Contains: 5-15% Acrylate Polymers, <5% Anionic Surfactants Also contains: Perfume, Dye |
CLEANING: | Clean tools, equipment, etc. using warm water. |
PACKAGING: | 1L Plastic Containers |
STORAGE CONDITIONS: | Store in sealed containers in dry conditions, protected from extremes of temperature |
SHELF LIFE: | 12 months in unopened manufacturer’s packaging |
APPLICATION INFORMATION
APPLICATION TEMPERATURE: | +3°C to +30°C |
COVERAGE: | up to 40 m2/L depending on dilution |
Larsen Clean & Shine DIRECTIONS FOR USE :
NOTE
Read Safety Datasheet before use. While Larsen Clean & Shine is suitable for almost all water washable surfaces it is recommended to always test on an inconspicuous area first to ensure suitability for use, particularly on tiles with a highly polished surface.
SUITABILITY
Suitable for use on porcelain, vitrified, glazed ceramic, certain types of natural stone, quarry tiles, vinyl, timber flooring.
DIRECTIONS
Remove any loose or dry material from the floor by sweeping or vacuum. (If floor is heavily soiled, clean first with standard floor detergent.) Dilute 1 to 2 cups (100 to 200ml) Larsen Clean & Shine in 10L water.
Apply dilute solution to the floor by mop. Pick up ‘dirty’ water completely by mop wringing out the mop regularly. Allow the floor to dry naturally. Do not rinse the floor after cleaning. Shine will improve with each application.
It is recommended to strip the floor annually using a suitable floor polish remover and reapply a suitable floor polish.
There are no reviews yet.