More about UltraFloor Level IT Base:
Ultra Floor Level IT BASE is a rapid setting and hardening, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. Level IT BASE may be mixed up and applied as single units and is especially suited to larger projects where it is deal for pumping applications and can be applied up to depths of 50mm. It is suitable for use in industrial , commercial and domestic flooring installations.
When mixed with clean cold water, Level IT BASE is a product that can be trowel or pump applied, to smooth and level, sound and strong internal subfloors prior to applications of Level IT TOP (see relevant technical datasheet sheet) where a wearing surface is required, and prior to applications of Ultra Floor smoothing underlayments when a finished decorative floor covering is being installed. In some applications Level IT BASE can be used as the finished floor prior to application of high build resin coating (consult Ultra Floor technical department).
It is a protein free formulation so maybe used in biologically sensitive areas and can be applied to most cementitious subfloors including those incorporating fully commissioned warm water underfloor heating systems. It may also be used over fully cured and dry calcium sulphate screeds.
UltraFloor Level IT BASE should be applied at a minimum application thickness of 5mm and can be applied up to a maximum of 50mm.
|Applied Thickness||Coverage Per Unit||Consumption per 100m2 Area|
|Specification||BS EN 1381:2002|
|Working time at 20oC||30 - 40 mins|
|Walk on hardness time at 20oC||2 - 3 hrs|
|Ready to receive floor coverings||24 hrs (5-15mm)
48 hrs (15-30mm)
72 hrs (30-50mm)
|Compressive Strengths (BS EN 13892-2)||1 Day: > 27N/mm2
7 Days: > 32N/mm2
28 Days: > 37N/mm2
|Flow Properties using a 200ml capacity Ultra Floor flow tube(48mm diameter, 106mm height)||250-280mm|
Tools should be thoroughly cleaned in water to remove excess materials immediately after use.
Store in a dry place between 5-30°C. When stored correctly and used within 6 months of the date shown on the bag, the reducing agent activity will be maintained and the product will contain, when mixed with water, no more than 0.0002% (2 ppm) soluble Chromium (VI) of the total dry weight of the cement. Note: The use of this product after the end of the 6 month storage period may increase risk of an allergic reaction.
Download / Brochures: