Removes cement film from glazed tiles, quarry tiles, brick and acid resistant surfaces
Palace Grout Film Remover will soften and remove the excess cement film from the tiles often which is left after grout has been applied. Grout Film Remover will also remove lime scale and surface efflorescence which sometimes forms on the surface of the grout joint in the first few weeks after application. It is not suitable for calcareous tile & stone.
Mild acidic formula
Lifts & dissolves difficult stains
Removes lime scale & efflorescence
Test before use
You can add this product to your order, however there must be a pallet/half/three-quarter-pallet in the cart to checkout.
Coverage: When diluted, this product will cover up to 10 square metres per litre, depending on surface texture and the degree of staining to be removed. Warning: Grout Film Remover should not be used on Calcareous Natural Stone, Travertine, Marble, slate, terrazzo, Granito, Cementitious tiles and any other acid sensitive surfaces.
It will soften and remove the excess cement film from the tiled surface which is often left after the grout has been applied, but will not affect the grout remaining within the tile joints. Grout Film Remover will also remove lime scale and surface efflorescence which sometimes forms on the surface of the grout joint in the first few weeks after application.
APPLICATION METHOD
To ensure the tiled surface is not acid sensitive, test-apply a few drops to a small innocuous area. If no reaction or permanent surface discoloration is observed then Dilute PALACE GROUT FILM REMOVER as 1 part to up to 7 parts with water and spread this solution evenly across a pre-wet surface. Apply the solution liberally and spread over the surface, covering no more than 10 – 15 m2 at a time, applying mild abrasion to areas where hardened cement film has accumulated. PALACE GROUT FILM REMOVER should only be used neat where heavy cement deposits have built up. Allow the solution to remain for about 10 minutes then flush the surface clean 2 or 3 times with copious volumes of clean water and scrub thoroughly with a synthetic fibre abrasive pad or a stiff brush and mop up. Rinse well with water at least 2 – 3 times. If necessary and repeat the application locally where any residual stains remain.
PROPERTIES
PALACE GROUT FILM REMOVER is designed for use on any non-calcareous tiled surfaces which are resistant to acid attack. This product is a blend of non-ionic surfactants, inorganic acids and sequestering agents designed to lift cement-based film, lime-scale and efflorescent residues from the surface and leave a clean bare tiled surface finish which may then be further treated with an appropriately selected surface protective sealer.
STORAGE AND PACKAGING
PALACE GROUT FILM REMOVER is supplied in 1 litre bottles packed 6 per case.
They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time.
Would fully recommend both on price and service. Thank you.
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days.
I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues.
In the event the pallet arrived on Thursday as requested.
Reliable and good value
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkPrivacy policy
There are no reviews yet.