SikaBond® Rapid DPM is a single part moisture curing polyurethane.
For priming, consolidating and sealing of:
£37.45 +VAT
Consumption:
As a surface conditioner/primer:
Apply 1 coat at a minimum consumption of 100 – 200 g/m2 (85-170 ml/m2).
As an isolator for old adhesive residues:
Apply 1 coat at a minimum consumption of 100 – 200 g/m2 (85-170 ml/m2).
As a Damp Proof Membrane: (tested in accordance with ASTM E 96)
Apply 2 – 3 coats at 100 – 250 g/m2 (85-215 ml/m2). Allow each coat to fully cure. Total consumption should be no less than 400 g/m2 (340 ml/m2).
Skinning / Laying Time: ~10-20 minutes (+20 °C 50 % r.h.)
Sag Flow: Consistency: Spreads easily when applied using brush, squeegee or short/medium pile roller
| Skinning / Laying Time | ~10-20 minutes (+20 °C 50 % r.h.) |
| Chemical Base | 1-part reaction cure synthetic resin. |
| Packaging | 5 L Jerry can. |
| Shelf Life | Up to 12 months from date of manufacture when stored as directed. |
| Storage Conditions | Store in tightly closed undamaged original sealed containers, in dry condi- tions and protected from direct sunlight at temperatures between +5 °C and +25 °C |
| Colour | Brown |
| Density | 1.16 g/cm3 |
| Flash Point | Closed cup >130 °C, Open cup >150 °C |
Service Temperature: Up to 35oC
| Consumption | As a surface conditioner/primer: Apply 1 coat at a minimum consumption of 100 – 200 g/m2 (85-170 ml/m2). As an isolator for old adhesive residues: Apply 1 coat at a minimum consumption of 100 – 200 g/m2 (85-170 ml/m2). As a Damp Proof Membrane: (tested in accordance with ASTM E 96) Apply 2 – 3 coats at 100 – 250 g/m2 (85-215 ml/m2). Allow each coat to fully cure. Total consumption should be no less than 400 g/m2 (340 ml/m2). |
| Ambient Air Temperature | Room temperature above +10 °C. Relative air humidity < 75 %. For ambient temperatures the standard construction rules are relevant. |
| Relative Air Humidity | Between 40 % and 75 %. |
| Substrate Temperature | During laying and until SikaBond® Rapid DPM has fully cured substrate temperature must be at least + 10 °C and in the case of underfloor heating < + 20 °C. For substrate temperatures the standard construction rules are relevant. |
| Substrate Moisture Content | Maximum substrate moisture content : ▪ 4 % CM for cement screed (ca. 6 % Tramex / Gravimetric weight percent). ▪ 0.5 % CM for anhydrite screed. ▪ 3 - 12 % CM for magnesia flooring (proportion of organic parts). Maximum substrate moisture content in case of underfloor heating: ▪ 3 % CM for cement screed (ca. 4.5 % Tramex / Gravimetric weight per- cent). ▪ 0.3 % CM for anhydrite screed. ▪ 3 - 12 % CM for magnesia flooring (proportion of organic parts). For moisture content and quality of substrates the guidelines of the wood floor manufacturer as well as standard construction rules must be ob- served. Please Note: Most wood floor manufacturers state a maximum substrate moisture content of 2 % CM (ca.2.5 % Tramex). |
| Curing Time | Approximately 45 minutes at 20 °C & 50 % r.h. |
Substrate quality: Clean, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Maximum moisture content must not exceed 4 % CM method (6 % Tramex) 3 % CM (4.5 % Tramex) in the case of underfloor heating. Standard construction rules must be observed.
Preparation:
| Brands |
|---|
You must be logged in to post a review.
outstanding customer service. prompt emails and felt like they actually cared about you as a customer.
Great company, really good prices…Kev does what he’s able to do to make sure he’s giving the best prices. Lent in and kept us up to date with all delivery reports, which was really helpful as I was not able to remain on site and wait.Would definitely use as my first port of call in the future. Good to see great customer service still exists!
Order two pallet loads of Titan Pro Joint, it was delivered first thing the following morning. I was stunned at how quickly Buy The Pallet were able to process and dispatch my order! Would highly recommend.
Simple to use website with competitive prices and excellent customer service - what a smooth and pleasant buying experience! Would highly recommend!
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Top quality service.
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
There are no reviews yet.