!FREE DELIVERY on Every Order (Most of Mainland UK) *
-0%
, , ,

BritFlex Rapid RS C2FTE – Pallet Deals and Bulk Buy – Rapid Setting Flexible Tile Adhesive

Brit Adhesives

BritFlex Rapid RS is

A single part fast setting adhesive with reduced slip and extended open time. suitable for interior and exterior use.

Britflex Rapid RS is suitable for fixing different tiles including ceramics, slate, limestone, marble, porcelain, terrazzo and mosaics to a variety of surfaces.  If used externally then a solid bed method of fixing is recommended. BRITFLEX RAPIDSET is suitable for matted underfloor heating.

SPECIFICATIONS:

  • POLYMER MODIFIED
  • HIGH STRENGTH
  • RAPID SETTING
  • NON-SLIP
  • INTERIOR & EXTERIOR USE
  • WALL & FLOOR TILES
  • BED THICKNESS 3-12MM
  • UNDERFLOOR HEATING COMPATIBLE
  • SUITABLE FOR PRE-STRENGTHENED WOODEN FLOORS

POT LIFE = 40mins
GROUT AFTER = 3 hours
COLOURS = GREY

Need a bespoke deal or spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@buythepallet.co.uk

~ FREE FAST 48HR DELIVERY on BRIT ADHESIVES: If ordered before 1pm~

[> DISCOUNT CALCULATOR BUYING – GREY <]
[> DISCOUNT CALCULATOR BUYING – WHITE <]

£293.50£537.90 +VAT

£293.50 £359.00 +VAT
£370.10 £434.00 +VAT
£465.20 £572.00 +VAT
£330.90 £379.50 +VAT
£420.10 £489.90 +VAT
£537.90 £684.50 +VAT
x

BritFlex Rapid RS further information

Coverage: 3.5Kg/m2 at approximately 3mm bed depth.

BRITFLEX RAPIDSET is suitable for fixing different tiles including ceramics, slate, limestone, marble, porcelain, terrazzo and mosaics to a variety of surfaces. Moisture sensitive backgrounds must be sealed correctly before tiling and it is recommended that a suitable wet room system is used. If used externally then a solid bed method of fixing is recommended. BRITFLEX RAPIDSET is suitable for matted underfloor heating, and the heating element should be embedded in a layer of tile adhesive or self levelling compound and allowed to set prior to fixing tiles.

PREPARATION

All surfaces must be free from loose matter, dry, clean from any dust or grease, fixed securely with screws to the supports and be dimensionally stable with no excessive movement. Wooden floors should be pre-strengthened with at least 15mm marine plywood mechanically fixed at 300mm centres.

MIXING RATIO

Add 20kg of BRITFLEX RAPIDSET into a mixing vessel containing 5It of clean cold water. BRITFLEX RAPIDSET should be mixed either by hand or with a mechanical mixer with water to form a smooth, lump free thixotropic paste. Mix as desired and allow to stand for 2 minutes before re-mixing for 30 seconds. Apply adhesive to the surface so that a continuous bed of adhesive between 3mm and 6mm is achieved. BRITFLEX RAPIDSET can be used up to 12mm in uneven areas.

TECHNICAL

All work should be carried out in accordance to the following Codes of Practice:

  • BS 8000: Workmanship on Construction Sites
  • BS 5385: Wall and Floor Tiling
  • APPLICATION TEMPERATURE: Between 5°C and 30°C
  • POT LIFE: 40 minutes
  • BEFORE GROUTING: 3 hours*
  • FULL USE: 24 hours*

*NOTE – The above times refer to site conditions of 20 °C. These times will be increased at lower temperatures and reduced at elevated temperatures.

BRITFLEX RAPIDSET RS summary technical information

Reaction to Fire:F
Bond Strength as:
- early tensile adhesion strength
- initial tensile adhesion strength

>= 0.5N/ mm2
>= 1.0N/ mm2
Durability for:
a) - tensile adhesion strength after
heat ageing
b) - tensile adhesion strength after
water immersion
c) - tensile adhesion strength after
freeze/thaw cycle

a) >= 1.0N/ mm2

b) >= 1.0N/ mm2

c) >= 1.0N/ mm2

APPLICATION

Plasterboard:
Ensure boards are securely fixed to the framework ideally screwed at 300mm centres and are rigid. The weight limit of plasterboard should be adhered to (32kg/m2 maximum load). Prime with a 2:1 dilution of BRITPRIMER and clean cold water before tiling.

Gypsum Plaster:
Ensure surface is dry and dust free with less than 0.5% moisture. Allow new plaster to dry for a minimum of 4 weeks. Prime with BritPrim Grip which will seal and give a key to the surface (20kg/m2 maximum load).

Brickwork, Blockwork and Render:
Ensure surface is fully cured and dry prior to tiling. Ensure the surface is free of contaminates. Prime the surface with a 1:1 dilution of BRITPRIMER and clean cold water before tiling.

Concrete Screeds:
Ensure surface is dry with less than 5% moisture. New concrete screeds must be allowed a minimum of 6 weeks drying time. Mechanically remove laitance from the surface of the concrete. Prime with a 1:1 dilution of BRITPRIMER and clean cold water before tiling. Very porous screeds may require a second coat applied 90° to the first.

Asphalt, Vinyl and Glazed Tiles:
Ensure surface is stable and suitable to receive a further surface coating, Remove all contaminates. Abrade the surface to provide a key. Prime the surface with BRITPRIMER diluted 1:1 with clean cold water mixed with approx 30% by weight of BRITFLEX RAPIDSET to form a slurry bond coat. Apply to floor and allow to dry before tiling commences.

Timber – Tongue & Groove Floorboards:
Ensure timber is structurally sound and capable of supporting the weight of the tiles/adhesive. Surface must be free of any contaminates. Boards must be securely fixed to supporting joists prior to overboarding with at least 15mm marine plywood screw fixed at 300mm centres. Apply one neat coat of BRITPRIMER and allow to dry until tacky before tiling.

CLEANING

Remove surplus adhesive with a damp cloth. Clean tools with water.

GROUTING

Grouting should be carried out using BRITFLEXI GROUT only after 3 hours and depending on site conditions.

STORAGE

Store unopened in original packaging in cool, dry conditions. BRITFLEX RAPIDSET has a shelf life of 12 months from the date shown on the packaging.

Brands

Units

20Kg bags

Colour

White, Grey

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “BritFlex Rapid RS C2FTE – Pallet Deals and Bulk Buy – Rapid Setting Flexible Tile Adhesive”

There are no reviews yet.

 

Buy The Pallet - Tile Adhesive and Floor Levellers Discount Store

5.0Out of 5 stars

Overall rating out of 16 Google reviews

Phil Down
3 hours ago

They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.

Dom
3 weeks ago

BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value

Gary Harper
2 months ago

Great service, great price and great communications. We will definitely use Buy The Pallet again

Adrian W
4 months ago

Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.

Stephen Tucker
4 months ago

Great customer service and at an unbeatable price. All delivered on the day I needed it.

Boon Teo
4 months ago

Great prices with a good ranges of products . Customer Service is excellent!

Max Simpson
5 months ago

Very helpful!

Neil Salih
3 years ago

Peter Bostock
3 years ago

I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend

Kev in
3 years ago

Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive

Rob Faulkner
3 years ago

Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.

Richard Fairlie
3 years ago

Great service and really good pricing! Super fast delivery and really lovely guy!

Marc. T
3 years ago

Very helpful