Bostik AP 250 Flexibond is an acrylic dispersion for use as a Primer/sealer for tile adhesive or as a flexible admixture with cement based tile adhesives and/ or grouts.
The addition of Bostik AP 250 Flexibond to a non-polymer modified adhesive or grout is required where surfaces are prone to very minor movement and vibration, or where direct fixing to glazed tiles or other impermeable surfaces is required.
£17.99 +VAT
Coverage:
As a diluted primer 2.5 litres will cover approx. 75m2
Approx. 2.5 litres of diluted Bostik AP 250 Flexibond per 20kg of adhesive
Approx. 0.5 litres of diluted Bostik AP 250 Flexibond per 5kg of grout
Bostik AP 250 Flexibond is an acrylic dispersion polymer for use as a flexible admixture with cement based tile adhesives and/or grouts. It can further be used as a primer/sealer for ready mixed tile adhesives and floor underlayment screeds.
It improves flexibility, shear modulus and tensile strength giving greater resistance to minor movements and vibration. Cement pores are part filled with the polymer, reducing the permeability and therefore reducing any damage by liquid transfer. Adhesion is enhanced when fixing to non-porous substrates and tiles. Improves the deformability of C2 adhesives to meet the requirements of class S1 according to EN12022.
The addition of Bostik AP 250 Flexibond to a non-polymer modified adhesive or grout is required where surfaces are prone to very minor movement and vibration, or where direct fixing to glazed tiles or other impervious surfaces is required.
3. Do not apply neat, as skinning may occur which may cause delamination. Apply to substrate using a brush. If the surface is still absorbent, apply a second coat. Dries in approximately 1 hour.
4. Ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling.
5. Ensure that tiles are firmly fixed and adhesive is completely set. Bostik standard set adhesives should normally be left for at least 24 hours before grouting. Bostik rapid setting adhesives should be left for at least 3 to 4 hours, however these times will be increased with sealed or impervious substrates or at low ambient temperatures, or high humidity. Ensure tiles and joints are clean, dry, sound and free from dust, grease or any contamination.
10. Follow the adhesive or grout product’s cleaning recommendations.
11. Clean tools and equipment immediately after use with water.
| Colour | White |
| Form | Liquid |
| Specific Gravity | 1.0 approx. |
| Composition | Acrylic dispersion polymer |
| Product Code | 30811643 2.5 Litre x 6 |
| Storage/Shelf Life | Store for up to 18 months from date of manufacture when stored in original, unopened packaging under cool, dry conditions within the temperature range of +5°C to +25°C and out of direct sunlight. Protect from frost. |
| Application Temperature | +5°C to +25°C |
| Service Temperature | Up to 40°C |
| Mix Ratio | 1 part AP 250 Flexibond to 2 parts water by volume when using as a flexible additive and as a primer |
| Coverage | As a diluted primer 2.5 litres will cover approx. 75m2 Approx. 2.5 litres of diluted AP 250 Flexibond per 20kg of adhesive Approx. 0.5 litres of diluted AP 250 Flexibond per 5kg of grout |
For any application not covered please contact Technical Services on +44 (0)1785 272625 or visit www.bostik.co.uk for advice.
Recommendations and suggestions are for guidance only, since conditions of use are completely beyond our control.
You must be logged in to post a review.
outstanding customer service. prompt emails and felt like they actually cared about you as a customer.
Great company, really good prices…Kev does what he’s able to do to make sure he’s giving the best prices. Lent in and kept us up to date with all delivery reports, which was really helpful as I was not able to remain on site and wait.Would definitely use as my first port of call in the future. Good to see great customer service still exists!
Order two pallet loads of Titan Pro Joint, it was delivered first thing the following morning. I was stunned at how quickly Buy The Pallet were able to process and dispatch my order! Would highly recommend.
Simple to use website with competitive prices and excellent customer service - what a smooth and pleasant buying experience! Would highly recommend!
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Top quality service.
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
There are no reviews yet.