- Setaflex Rapid S1
- Trade Flexi Rapid C2-FT
- Standard Set Setaflex S1
- Setaflex Semi-Rapid S1
- Ultimate S2
- AnhyFix (Gypsum based)
- Standard Set Extrabond
- Rapid Extrabond
- Thick Bed FlexiRapid
An excellent interior, exterior and underwater rapid setting tile adhesive and as well as providing superior bond strength to all commonly encountered building materials including WBP exterior glue plywood, it has been used to fix heavy & large format tile & stone in the most challenging environments. 254 Platinum Rapid is the ultimate fast setting adhesive for porcelain tiles and locations where sub-floor heating has been installed.
A fast setting high performance polymer fortified cement-based adhesive to be mixed with water when fixing either wall & floor tile & stone including low absorption porcelain; vitrified tiles & natural stone where the WHITE version is particularly recommended for light stone & marble. Laticrete SUPERFLEX 335R is ideal where time is limited and fast access is needed to complete the grouting and also when fixing over fully braced 18mm WBP Plywood; sub-floor heating; fully immersed tile installations or in external locations.
A Rapid-Setting Powder-Based Tile Adhesive. Ideal to allow grouting to begin quickly after installation.
It is suitable for:
Tiles can be grouted 3 hours after fixing. The set adhesive is frost and water resistant and can be used in showers, or under continuous immersion such as swimming pools. Available in 20kg White and Grey.
MUDD FAST FIXER exceeds the requirements of EN12004:2007 for a C2FT tile adhesive.
An ultra-lightweight, thin & thick-bed, flexible floor and wall tile adhesive available in White & Grey. It incorporates recycled low density blown glass to give a high-yield, easy to apply adhesive mortar with 50% reduced weight loading, suitable for fixing all types of tiling, including large format tile & stone. PALACE EXTRA-LITE FAST SET gives an extended working pot life of up to 1 hour and sets within 3 hours to allow grout application to proceed the next day.
Recommended for application over a comprehensive range of floor surfaces such as tamped or worn concrete and sand/cement floor screeds as well as non-porous floors such as mastic asphalt, plywood and mildly abraded power-floated concrete. It is particularly suited for installation in conjunction with heated sub-floors and can readily accommodate most types of wire-based sub-tile heating systems.
Coverage: 20kg Approx. 5m² at 3mm depth
A fast setting, polymer modified, calcium sulphate (gypsum) based adhesive for fixing ceramic & semi-porous stone tiles onto wall & floor surfaces which are constructed from gypsum-based materials, such as an Anhydrite floor screed or a Gypsum based smooth finishing plaster. It offers a compatible solution to allow direct fixing on “gypsum-based” floors & walls and its’ fast-setting” properties allow grouting to proceed after 3 hours after setting.
Ideal for fixing all types of ceramic tile and stone to solid surfaces, heated sub-floors and Tile Backer boards. It is a fast setting grey or white adhesive and allows grouting to proceed 3 hours after it sets to a fully water-resistant high early strength bond suitable for interior / exterior use and locations which are frequently wet.
Recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available in grey or white and allows grouting to proceed 3 hours after it cures to a fully water-resistant high early strength bond suitable for interior / exterior use and locations which are frequently wet.
A Grey Rapid Set Adhesive for Tiles & Natural Stone, 20kg.
ROCATEX C1F Rapid Grey is a single part, rapid setting cementitious wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of solid substrates. Suitable for interior and exterior use.
A Grey Rapid Set Flexible Adhesive for Tiles & Natural Stone, 20kg.
ROCATEX C2FT S1 Rapid Flex Grey is a single part, flexible wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Sutable for interior and exterior use.
A White Rapid Set Flexible Adhesive for Tiles & Natural Stone, 20kg.
ROCATEX C2FT S1 Rapid Flex White is a single part, flexible wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Sutable for interior and exterior use.
A White Rapid Set Highly Flexible Adhesive for Tiles & Natural Stone, 20kg.
ROCATEX C2FT S2 Ultimate Rapid Flex White is a single part, highly flexible, rapid setting wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Suitable for interior and exterior use, also as a fast track solution for green screeds.
An ultra-rapid setting and drying, high performance latex based two-part self-levelling floor compound that employs advanced binder system technology, providing an underlayment where a fast-track solution is required. The specially formulated powder component is mixed with the pre-gauged, protein free polymer latex liquid, giving a free-flowing, shrinkage compensated self-levelling floor compound.
A polymer modified, flexible rapid setting cement based floor and wall tile adhesive with increased adhesion and non-slip properties. It’s rapid-setting capability allows for grouting and light foot traffic after just 3 hours.
Specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to well prepared substrates that may be subject to limited movement and/or vibration such as plywood overlay and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed. Can be used internally and externally and it is unaffected by frost after setting
Tilemaster FlexiLevel has been specially formulated to allow the product to be poured to depths between 2mm – 50mm in one application and receive foot traffic after 3 hours. Suitable for a wide range of both commercial and domestic applications.
Rapid Extrabond is a rapid setting, polymer modified cement based floor and wall tile adhesive with increased adhesion and non-slip properties.
Rapid Extrabond has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to solid substrates such as sand/cement screed and concrete. Its rapid setting capability allows for light foot traffic and grouting after 3 hours. It can be used internally and externally and it is unaffected by frost after setting.
When mixed with Flexmaster Additive, Rapid Extrabond is suitable for fixing to a wider variety of substrates.
Tilemaster Thick Bed FlexiRapid is a pourable and flexible rapid setting cement based floor tile adhesive.
Thick Bed FlexiRapid has been specially developed for the solid bed fixing of a wide range of large format tiles such as:
Thick Bed FlexiRapid can be applied up to a bed thickness of 25mm. It is ideal for fixing tiles of uneven thicknesses, for fixing to uneven surfaces and it can also be used to level uneven floors. A fast track adhesive, the rapid setting properties of Thick Bed FlexiRapid allow for light foot traffic and grouting after 3 hours. It is ideal for use in areas subject to prolonged or permanent wet conditions such as wet rooms and swimming pools. The product can be used internally and externally and it is unaffected by frost after setting.
A single part, high strength, rapid drying and curing cementitious smoothing underlayment. The product’s formulation incorporates a blend of specially graded fillers, fine cements, polymers and fibres. Our specially formulated fibre technology aids application and strength resulting in a strong, sound and even base ready to commence the tiling process after only 45 minutes.
UltraTileFix ProRapid RS is a single part, rapid setting, flexible adhesive for wall and floor tiles. It is specially formulated with enhanced adhesion and flexibility for use with ceramic, porcelain and natural stone tiles. It is a polymer modified adhesive suitable for use with most common substrates and is able to take light foot traffic within 3 hours of installation depending upon temperature and substrate.