It’s a hybrid primer for the ultimate mechanical key. It is a high performance bonding agent specifically designed for tiling and flooring installations. Formulated with advanced polymers and special fine aggregate, it is a universal multi-purpose primer. Larsen Primer Grip 360 is designed to provide an improved mechanical key to all common absorbent and non-absorbent backgrounds including plaster, plasterboard, timber, concrete, epoxy DPM, flooring grade asphalt and glazed tiles. Larsen Primer Grip 360 is rapid drying and can be tiled over or levelled in as little as 15-20 minutes.
£9.95 – £29.95 +VAT
Coverage: 5 – 10sq m per kg depending on application
| DENSITY: | Approx 1.4kg/L |
| APPLICATION TEMPERATURE: | +5°C to +35°C |
| COVERAGE: | 5 - 10sqm per kg depending on application |
| DRYING TIME: | 15-20min on porous substrates in good conditions |
| FORM: | Gritty paste |
| STANDARD COLOUR(S): | Green |
| HAZARD INFORMATION: | No significant Hazard |
| CLEANING: | Clean tools, equipment etc. using warm water. |
| PACKAGING: | 5kg tub |
| STORAGE CONDITIONS: | Store in sealed containers in dry conditions, protected from extremes of temperature |
| SHELF LIFE: | 12 months in unopened manufacturer's packaging |
Substrate should be structurally sound & stable. It should be suitably cured, dry, free from dust and all contamination that may affect bond. It should be suitable for the application and sufficiently rigid for the ultimate traffic and loading.
Gypsum Based Screeds: Gypsum based screeds require mechanical preparation by buffing, vacuuming etc. The screed must be tested to ensure it is dry (less than 0.5% moisture content measured by CM or less than 75% RH). Particularly absorbent screed should first be primed with 1 coat of Larsen Acrylic primer diluted 1:1 with clean water.
Gypsum Plaster Gypsum: plaster on walls is suitable for a weight of tiles and adhesive of up to 20kg/m2. Ensure surface is free from dust.
Plasterboards (incl. moisture resistant): On walls are suitable for a weight of tiles and adhesive of up to 32kg/m2. Ensure surface is free from dust and boards are securely fixed.
Timber Substrates Timber substrates must be sufficiently rigid and supported to be free from excessive deflection under expected loads, otherwise, they should be overboarded. Ensure adequate ventilation exists beneath the floor. Ensure all new wood (including joists) is ‘dry’ and conditioned. Floors should be designed to accommodate both seasonal changes in moisture and the changes caused by step changes in heating. Extra joists/noggins should be added to strengthen the floor as required.
Tile Backer Board: Ensure the surface is dry and free of any contaminants, loose dust or dirt.
Flooring Grade Asphalt: Ensure that the flooring grade asphalt is in good condition and suitable for covering. Clean the surface with a suitable degreaser, rinse and allow to dry before applying primer.
Existing Tiles: Ensure tiles are well bonded. Ensure the surface is clean, dry and free of any contamination including sealers. In kitchens, food preparation areas etc, surface should be cleaned with a suitable degreaser, rinsed and allow to dry. Ensure primary wall substrate is sufficiently strong to receive the extra weight of additional tiles.
Existing Vinyl: Ensure vinyl is well bonded. Ensure the surface is clean, dry and free of any contamination including sealers. In kitchens, food preparation areas etc, surface should be cleaned with a suitable degreaser, rinsed and allow to dry.
Power Floated Concrete: Ensure the surface has been allowed minimum 28 days to cure. For small areas, the power-floated concrete may be primed directly with Larsen Primer Grip360. For large areas it is recommended to first mechanically prepare the surface by shot blasting, vacuuming etc.
Epoxy Damp Proof Membrane: Ensure the surface is suitably cured and free of any contamination that may affect bond.
Steel: Ensure metal is clean bright metal, free from oil, rust or any other contamination which may interfere with bond. For best results a light shot blast texture is beneficial. Metal must be suitably supported and fixed to provide a stable substrate sufficiently free from deflection for the intended use. For large areas, consult with our technical department for further advice.
Larsen Primer Grip 360 is supplied ready to use and only requires stirring before use to ensure aggregate is evenly distributed.
Do not add water. Once mixed, use straight from tub or pour into a roller tray.
Standard paint application techniques are used. Apply in one coat only. Apply using a short pile roller or brush to give an even coating.
Larsen Primer Grip 360 is tinted green to give clear indication of coated areas and to help avoid missing any areas.
Do not allow to pond and do not apply in thick layers.
Protect adjacent surfaces from splashes and remove any Larsen Primer Grip 360 before drying with warm soapy water.
Allow to dry thoroughly before applying tile adhesive or leveller. Typically dries in 15-30min on absorbent surfaces. Drying times will be extended in low temperatures and high humidity and on non-porous surfaces. Avoid trafficking primed areas until covered.
Reseal tub after use to prevent skinning.
Do not apply in thick layers. Temperature – Minimum 5°C during application and for a period of 24 hours subsequently. Substrates must be suitable for application, priming will not make poor substrates good. It is not recommended for use on substrates which are not sufficiently strong or suitable to receive the finish, for example painted walls are not suitable to receive tiling. Not suitable for application over soft bituminous materials, oils, grease etc. If in doubt, contact our Technical Department.
| Brands |
|---|
You must be logged in to post a review.
outstanding customer service. prompt emails and felt like they actually cared about you as a customer.
Great company, really good prices…Kev does what he’s able to do to make sure he’s giving the best prices. Lent in and kept us up to date with all delivery reports, which was really helpful as I was not able to remain on site and wait.Would definitely use as my first port of call in the future. Good to see great customer service still exists!
Order two pallet loads of Titan Pro Joint, it was delivered first thing the following morning. I was stunned at how quickly Buy The Pallet were able to process and dispatch my order! Would highly recommend.
Simple to use website with competitive prices and excellent customer service - what a smooth and pleasant buying experience! Would highly recommend!
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Top quality service.
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
There are no reviews yet.