Tilemaster Trade Flexi Rapid:
COVERAGE: 20kg will cover 5 – 6m² at 3mm thin bed application
Tilemaster Trade FlexiRapid is a polymer modified, flexible, rapid setting cement based floor and wall tile adhesive with increased adhesion and reduced slip properties.
It has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone to substrates subject to limited movement and/or vibration, such as overlaid timber substrates and underfloor heating systems and its rapid setting capability allows for light foot traffic and grouting after 3 hours.
It is ideal for use in areas subject to prolonged or permanent wet conditions, such as swimming pools. Trade FlexiRapid can be used internally and externally and it is unaffected by frost after setting.
N.B. Tilemaster Trade FlexiRapid is suitable for use with natural stone tiles, but given the unique characteristics of natural stone tiles it is advised that any stone is checked and tested for suitability before fixing commences
Tilemaster Trade FlexiRapid technical data:
Standard Conformity | Conforms to BS EN 12004 C2 FT |
Minimum Application Temperature | 5oC |
Bed Thickness | 3mm – 12mm |
Coverage | 20kg will cover approximately 5.5m2 with a 3mm solid bed application |
Pot Life | Approximately 30 minutes at 23oC |
Before Grouting | Approximately 3 hours depending on temperature and substrate The set time will be increased by lower temperatures and reduced at higher temperatures * Tiling onto an impervious substrate with a non-porous tile will increase the set time |
Working Temperature of Cured Adhesive | -40oC to 90oC |
Storage | Store unopened, clear of the ground in cool, dry conditions |
Shelf Life | Stored correctly this product has a shelf life of 6 months |
Colours | Grey and White |
Pack Sizes | 20kg |
Note | All work must be carried out in accordance with British Standard Code of Practice for floor and wall tiling BS5385 |
ADVANTAGES:
- Flexible, rapid setting formula
- Walk on and grout after 3 hours
- Ideal for plywood overlay
- Underfloor Heating
- Natural Stones & Porcelain
- Essential for areas of movement
- Simply mix with water, no additives required
- Conforms to EN 12004 Class C2 FT
TILES:
- Porcelain
- Natural Stones
- Ceramics
- Terracotta
- Quarry
- Mosaics
SURFACE / SUBSTRATE:
- Sand/Cement Screed
- Plywood (18mm)
- Concrete
- Fibre cement sheets
- Gypsum Plaster
- Tilebacker Boards
- Anhydrite Screeds
- Plasterboard
- Existing Tiles
- Cement/Sand render
- Underfloor Heated Screeds
- Concrete Brick/Block
- Electric Underfloor Heating
- Vinyl Tiles/Sheets
- Flooring grade
- Asphalt & Bitumen
FINISHED SURFACES:
- Porcelain
- Ceramics
- Terracotta
- Quarry
- Natural Stones
- Mosaics