Sika-2 Water Plug extended information
Consumption: ~0,7 L per 1 kg of cement
Substrate Temperature: +5 °C min. / +30 °C max.
Sika-2 Uses
To quickly seal cracks, fissures and holes in concrete, rock or masonry where there is water infiltration in:
- Walls
- Tunnels
- Subways
- Basements
- Cellars
- Pits
- Vaults
- Walls
Sika-2 Water Plug product information
Chemical Base | Blend of inorganic chemicals |
Packaging | 5 litres (4 in a box) |
Appearance / Colour | Red liquid |
Shelf Life | 12 months from date of production |
Storage Conditions | The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. ways refer to packaging. |
Density | ~1,25 kg/l |
pH-Value | ~12 |
Sika-2 Water Plug system information
System structure: Sika-2 can be used as a system with surface rendering mortars. Contact Sika Technical Services for additional information.
Application Instructions
SUBSTRATE QUALITY / PRE-TREATMENT
The substrate shall be clean, free of contamination, loose particles and dust.
MIXING
Use 1 part Sika-2 to 2 parts of Ordinary Portland Cement. Place Sika-2 into a suitable clean mixing bowl and add the Ordinary Portland Cement. Stir quickly into a paste for a few seconds.
APPLICATION METHOD / TOOLS
Mould the paste with a gloved hand into a plug and place immediately into the crack, fissure or hole pressing firmly for ~15 seconds until the mix has hardened.
It is recommended to only mix sufficient material that can be placed immediately.
CLEANING OF TOOLS
Clean all tools and application equipment with water immediately after use.Hardened material may only be removed mechanically.
Sika-2 Limitations
- Do not dilute
- Very strong leaks may need controlling using discharge points before the plug can be placed
- Working and hardening times are affected by tem-peratures, source and age of the Ordinary Portland Cement. It is recommended to make an initial pre-trial.
There are no reviews yet.