Genesis Strato Decoupling Membrane extended information
Installation
Before laying STRATO MEMBRANE, the substrate should be firm, sound, clean and be under the recommended moisture content
Inserting Genesis STRATO MEMBRANE does not eliminate the need for expansion and perimeter joints, for which it is necessary to follow the instructions in the standard UNI 11493-1.
Disconnecting Function
01. Adhesive must be used to lay Genesis STRATO MEMBRANE over the substrate, using a notched trowel.
02. STRATO MEMBRANE must be laid over the designated area, with the spunbonded cladded side facing down. STRATO MEMBRANE must then be pressed down into adhesive with the aid of a float, applying pressure to prevent the creation of air pockets. Genesis STRATO MEMBRANE must then be covered with another layer of class C2 (or greater) cementitious adhesive. The tiles can then be laid without waiting for it to dry, using a notched trowel of dimensions appropriate for the size of the tiles to be laid.
Then proceed with point 7-8
Waterproofing Function
03. Other measures are required during the laying stage to provide the additional waterproofing function. After laying Genesis STRATO MEMBRANE, it is necessary to seal the joints between the adjacent sheets with adhesive, spreading it with the smooth side of the notched trowel.
04. Then STRATO BAND must be applied.
05. The same procedure must be followed for the perimeter waterproofing, then adhesive is applied.
06. Then STRATO BAND must be laid. At the joint, STRATO BAND must overlap it by at least 50 mm. The same procedure must be used for the perimeter joints, using STRATO BAND centred in the floor / wall connection with adhesive.
(For outdoor applications in particular, it is important to lay the cladding over the entire area, in compliance with the current reference standard 11493-1)
07. Then the class C2 (or greater) cementitious adhesive must be spread followed by the laying of the finishing product
08. The plinth/skirting board must be kept detached from the floor, the remaining gap must be sealed with elastic material (silicone or perimeter joint profile).
Genesis STRATO MEMBRANE Physical Values
Physical Values | Standard | Value | Tolerance |
---|---|---|---|
Weight | DIN EN ISO 9864 | 570 g/m2 | ± 50 g/m2 |
Thickness at 2 kPa | DIN EN ISO 9863-1 | 3.25 mm | ± 1 mm |
Tensile strength MD/CMD | DIN EN ISO 10319 | 8/8 kN/m | - 2 kN/m |
Elongation at max load MD/CMD | DIN EN ISO 10319 | 33% | -3 % |
Pull out (28 days, cement glue, room temp) | DIN EN 1348 | 0.25 N/mm2 | ± 0.15 N/ mm2 |
Technical Specifications
Mat thickness: approx. 3 mm
Material: Plastic HDPE
Weight: approx. 570 g/m²
Roll width: 1 m
Roll length: 30 m
All information is approximate. Since we can not assume liability for special applications, a corresponding suitability test must always be carried out by the customer.
Sizes
STEM30 1 m width x 30 m length
Packing Unit
Pieces = 1 roll, pallet = 6 rolls
Genesi STRATO MEMBRANE Application & Substrates
Suitable for installation in damp and wet rooms, indoors and outdoors. Processing within 24 months from date of shipment.
- Concrete Screed (Anhydrite)
- Calcium Sulphate Screed
- Heating Screed
- Poured Asphalt
- Concrete
- Resin and Coated Floors
- Chipboards and Pressed Sheets
- Wooden Floors
Specifications
- Quick and easy installation
- Maximum protection for tiling
- Ideal for new build and renovation projects
- Protects tiling against cracking
- High shear elasticity
Storage and Transport
The STRATO MEMBRANE should be protected against external impact and abrasion during transportation
Genesis STRATO MEMBRANE Recycling
STRATO MEMBRANE can be disposed with PVC recycling
There are no reviews yet.