Python RM D1TE 15kg Ready Mixed Tile Adhesive – For Wall Tiling – Pallet Deals and Bulk Buy

Python RM further information

NB: Python RM has been specially formulated for its non-slip, high grab properties, which allow the speedy application of large format tiles. The product is suitable for intermittently wet conditions i.e. domestic showers, kitchens and bathrooms. It contains an anti-fungal additive, which prevents the build up of mould. It is not recommended for exterior use or areas subjected to immersion such as swimming
pools.

List of Substrates

• Concrete
• Cement/Sand Render
• Concrete Brick/Block
• Domestic Showers
• Tile on Tile
• Tile Backer Boards
• Existing Ceramic, Porcelain and Natural Stone Tiles
• Plaster
• Plasterboard
• Sand/Cement Screed
• Fibre Cement Sheet

Preparation

Ensure all areas are clean, dry and free from dust or any other contaminating barriers. Remove any flaking or peeling layers.

Substrate Preparation Guide:

Plaster: Tile only onto a finished coat. Leave new plaster for at least 4 weeks in order for it to be strong enough to support the tiling weight.

Cement/Sand Render: Leave new surfaces to dry out for at least 2 weeks before tiling.

Existing Ceramic, Porcelain & Natural Stone Tiles: Ensure the surface is dry and free of any contaminants, loose dust or dirt. Existing tiles that have been previously treated with sealer must be sufficiently cleaned in order to remove any surface treatments. Prime the surface with one coat of Python PR and allow to dry.

Brickwork/Concrete: Leave new surfaces to dry out for at least 4 weeks.

Plasterboard/Fibre Reinforced Cement Sheets: Boards should be braced and screwed horizontally and vertically at 300mm centres.

Domestic Showers: Ensure 100% solid bed coverage is achieved. Do not leave voids as this will trap water and cause adhesive failure.

Tile on Tile: Will fix porous tiles to existing ceramic tiles. Please note that existing surfaces should be prepared in accordance with our
surface preparation guidelines. For best results abrade the surface to form a key.

How to Mix and Apply Python RM

Apply adhesive to the surface by use of a notched trowel. Bed tiles in firmly with a slight twisting action. Clean off excess adhesive from the tile face with a damp cloth and rake excess from the grout lines before it sets. Leave for a minimum of 24 hours before grouting (on impervious or sealed surfaces longer time will be required). Do not apply more than 1m2 of adhesive before tiling commences, as skinning may occur. If skinning does occur it can affect the bond. Maximum bed thickness is 3mm, achieved by using a 6mm by 6mm notched trowel. Spot bonding is not recommended.

NB: All tiling should follow the correct British/European Standard and incorporate movement joints therein.

How to clean after use of Python RM?

Tools should be thoroughly cleaned in water to remove excess material immediately after use.

Python RM Technical Data

*Drying depends on site conditions, ambient temperatures and porosity of the substrate.
Low temperature conditions will extend the drying period of the adhesive as will low porosity substrates and tiles.