Everbuild Roll and Stroll Glass Protector Film – Bulk Buy – The ultimate self adhesive glass protector film

Everbuild Roll and Stroll Glass Protector Film further information

Usage: Suitable for use on glass surfaces.

Application Instructions

SUBSTRATE PREPARATION

Ensure surfaces to which EVERBUILD® ROLL & STROLL® Glass Protector is to be applied are clean, dust free and dry. Remove outer packaging from roll.

APPLICATION METHOD / TOOLS

Place roll at the top of the glass and unwind approx 12 inches (300mm) of material. Ensure the roll is stuck by smoothing out. Simply drag roll downwards using hands ensuring roll goes in a straight line. Smooth out with hands as it unwinds. Carefully cut EVERBUILD ROLL & STROLL Glass Protector film with a sharp knife or scissors, take care not to damage or scratch the covered surface.

Everbuild Roll and Stroll Glass Protector film Product Information

LIMITATIONS

• This product is for application to glass, DO NOT use on carpets. Use Everbuild ROLL & STROLL Carpet Protector.
• Obviously, adhesion will be reduced on dusty surfaces. Vacuuming or wiping using EVERBUILD GLASS CLEANER and paper wipes prior to use is recommended.
• *EVERBUILD ROLL & STROLL Glass Protector must be removed after a maximum of 4 weeks to prevent a sticky residue being left.
• Always check EVERBUILD ROLL & STROLL Glass Protector is stuck firmly to surfaces before commencing work.
• On some surfaces EVERBUILD ROLL & STROLL Glass Protector may leave a residue, this can be easily removed using Everbuild GLASS CLEANER and paper wipes. A test area is always recommended prior to full application.
• *Where air temperature exceeds 22°C, remove EVERBUILD ROLL & STROLL Glass Protector after 1 week maximum.
• It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.