!FREE DELIVERY on Every Order (Most of Mainland UK) *
,

Soudal Fix ALL Turbo 290mL Pallet Deals and Bulk Buy – Super Fast Curing Hybrid SMX polymer sealant adhesive

Soudal

Soudal Fix ALL Turbo is a

Hybrid polymer sealant adhesive

Soudal Fix ALL Turbo is a super-fast curing adhesive with exceptional final bond strength. Based on SMX Polymer Technology, Turbo has rapid strength build-up after 20 minutes. Final bond strength achieved in 3 hours. For all types of bonding applications, onto all types of surfaces, even wet or humid non-porous surfaces.

  • Super fast
  • Rapid strength build up after 20 mins
  • Final bond strength in 3 hours
  • Permanently flexible
  • ALL materials, ALL surfaces (except on PE, PP and PTFE)
  • Virtually odourless
  • Good weather and UV resistance
  • Primerless adhesion
  • Interior and exterior applications
  • Unit size: 290ml

Applications

  • For all bonding applications where adhesive strength build up speed is highly critical or important.
  • Heavy duty bonding in all weather conditions, on most surfaces. Suitable for bonding porous (i.e. natural stone) and non porous surfaces.

Soudal Fix ALL Turbo extended information

Q & A

Q: Can Soudal Fix ALL be painted?

A: Hybrids can be painted very well using most paint types. Note: Paint is less flexible than hybrid sealants and therefore the paint may crack when adhesive sealant joints move. We recommend always carrying out a prior adhesion and compatibility test.

Q: Can Fix ALL freeze?

A: Hybrids cannot freeze due to their extremely low water content.

Q: What is the curing time of Soudal Fix ALL?

A: The curing time of Fix ALL® will depend on the following factors:

  • The thickness of the joint
  • Humidity
  • Temperature
  • Surface

Under optimum conditions (20°C and a RH of 60% RH), a 2-3mm bead will need 24 hours.

Instructions

Surfaces and materials should be clean and free of dust and grease. When used as adhesive: apply in beads or dots onto the material which needs to be bonded, press the material strongly onto the substrate and leave to set. Fixed in 20 minutes, final strength achieved in 3 hours. Application temperature: +5°C until +35°C.

Soudal Fix ALL Turbo technical data

BasisSMX Hybrid Polymer
ConsistencyStable paste
Curing systemMoisture curing
Skin formation* (23°C/50% R.H.)Ca. 5 min
Curing speed * (23°C/50% R.H.)2 mm/24h → 3 mm/24h
Hardness**65 ± 5 Shore A
Density**1,52 g/ml
Elastic recovery (ISO 7389)**> 75 %
Maximum allowed distortion± 20 %
Max. tension (ISO 37)**3,80 N/mm²
Elasticity modulus 100% (ISO 37)**3,00 N/mm²
Elongation at break (ISO 37)**200 %
Hand tight (*)After 20 min (after pressing firmly)
Adjustable untilCa. 5 min
Temperature resistance**-40 °C → 90 °C
Application temperature5 °C → 35 °C

*These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. ** This information relates to fully cured product.

Product Description

Soudal Fix ALL Turbo is a high quality, neutral, elastic, one-component adhesive-sealant with very fast strength build-up based on SMX-polymer. Fix ALL Turbo is a KOMO-certified construction adhesive based on BRL3107.

Properties
  • Quickly manipulable and very fast build-up xof strength with thin adhesive layer and on porous substrates.
  • Very high final strength
  • Good extrudability
  • Good adhesion to most common substrates, even on slightly wet substrates
  • Permanently elastic after curing
  • Can be painted with water based systems
  • Good weather and UV resistance
  • No staining on porous surfaces such as marble, granite and other natural stones
Applications
  • Bonding in building and metal industry.
  • Elastic bonding of objects, panels, profiles and other pieces on the most common substrates.
  • Sealing and bonding in the building and construction industry.
Shelf Life

15 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.

Soudal Fix ALL Turbo  Chemical Resistance

Good resistance to (salt)water, aliphatic solvents, hydrocarbons, ketones, esters, alcohols, diluted mineral acids and alkalis. Poor resistance to aromatic solvents, concentrated acids and chlorinated hydrocarbons.

Substrates

Substrates: all usual building substrates, treated wood, aluminium, natural stone, plastics, …

Nature: rigid, clean, dry or slightly moist, free of dust and grease

Surface Preparation

Porous surfaces should be primed with Primer 150. Prepare non-porous surfaces with a Soudal activator or cleaner (see Technical Data Sheet).
Fix ALL Turbo has been tested on the following metal surfaces: steel, AlMgSi1, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403. Soudal Fix ALL Turbo also has a good adhesion on plastics:

polystyrene, polycarbonate (Makrolon®), PVC, ABS, polyamide, PMMA, fiberglass reinforced epoxy, polyester. While producing plastics very
often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding or sealing. For optimum adhesion the use of Surface Activator is recommended.

NOTICE: bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Soudal Fix ALL Turbo is not recommended in these applications. Not suitable for PE, PP, PTFE (eg Teflon®), bituminous substrates, copper or copper- containing materials such as bronze and brass. We recommend a preliminary adhesion and compatibility test on every surface.

Application method

Application method: Apply the adhesive by means a caulking gun in uniform adhesive strips or dots (every 15 cm) on one of the substrates. Always apply an adhesive dot or strip on the corner and edges of panels. Do not apply the glue in a closed circumference, but interrupted. Bond the substrate and tamp with a rubber hammer. If necessary, support the bonded materials. For bonding on absorbent and porous substrates with thin adhesive layer, the adhesive is already hand tight after approx. 20 minutes and can be loaded after about 3 hours. Thicker adhesive layers or non- absorbent substrates extend the curing time. Cleaning: Clean with Soudal Surface Cleaner or with Soudal Swipex, immediately after use Cured Soudal Fix ALL Turbo can only be removed mechanically.

Finishing: With a soapy solution or Soudal Finishing Solution before skinning. Repair: With the same material.

Health- and Safety Recommendations

Take the usual labour hygiene into account.

Consult label and material safety data sheet for more information.

Dangerous. Respect the precautions for use.

 

Remarks
  • Fix ALL Turbo is paintable with most common paints. Due to the wide variety of lacquers and paints, a compatibility test is always recommended.
  • The drying time of alkyd resin based paints may increase.
  • Soudal Fix ALL Turbo can not be used as a glazing sealant.
  • Not suitable for bonding aquariums.
  • Do not use in applications where continuous water immersion is possible.
  • Not suitable for sanitary applications.
  • Fix ALL Turbo can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface.
  • When applying, make sure that the surface of the materials is not smudged with sealant.
  • Contact with bitumen, tar or other plasticizer releasing materials such as EPDM, neoprene, butyl, etc. is to be avoided since it can give rise to discolouration and loss of adhesion.
  • When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
  • Soudal Fix ALL Turbo has a good UV resistance but can discolour under extreme conditions or after very long UV exposure.
  • Discolouration due to chemicals, high temperatures, UV-radiation may occur. A change in colour does not affect the technical properties of the product.
Soudal Fix ALL Turbo Standards and certificates

NL: KOMO certificate Nr. 33275 construction adhesive based on BRL3107.

Declaration of compliance ISEGA – Tested for use in foodstuffs-related area.

Environmental clauses

Leed regulation:

Fix ALL Turbo conforms to the requirements of LEED. Low –Emitting Materials: Adhesives and Sealants. SCAQMD rule 1168. Complies with USGBC LEED 2009 Credit 4.1: Low-Emitting Materials – Adhesives & Sealants concerning the VOC-content.

Soudal Fix ALL Turbo technical video

Categories: ,
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Soudal Fix ALL Turbo 290mL Pallet Deals and Bulk Buy – Super Fast Curing Hybrid SMX polymer sealant adhesive”

There are no reviews yet.

 

Buy The Pallet - Tile Adhesive and Floor Levellers Discount Store

5.0Out of 5 stars

Overall rating out of 20 Google reviews

Dean Clare
12 hours ago

Top quality service.

Kelvin Wiltshire
12 hours ago

We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall

Aaron Nairn
4 months ago

Fantastic customer service and fast delivery, highly recommend

Gary Dawson
8 months ago

Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.

Phil Down
9 months ago

They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.

Dom
10 months ago

BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value

Gary Harper
11 months ago

Great service, great price and great communications. We will definitely use Buy The Pallet again

Adrian W
a year ago

Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.

Rob Jones
3 years ago

Companies like this a rare, great quick service, great price and easy to do business with. Will definitely use them again for all my supplies.

Boon Teo
a year ago

Great prices with a good ranges of products . Customer Service is excellent!

Peter Bostock
3 years ago

I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend

Kev in
3 years ago

Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive

Richard Fairlie
3 years ago

Great service and really good pricing! Super fast delivery and really lovely guy!

Rob Faulkner
3 years ago

Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.

phil harvey
4 years ago

First class service, good price, fast delivery and the chap at the end of the phone knew what he was on about. Highly recommend and will use them again.

Max Simpson
a year ago

Very helpful!

Marc. T
3 years ago

Very helpful

Kelvin Wiltshire
12 hours ago

We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall