Sika-1 extended information
Recommended Dosage:
Add one part of Sika-1 to 10 parts of water, which is equivalent to approximately 3% of cement content. When using very wet sand, the ratio must be increased to 1:8 or in extreme cases 1:6.
Note: Trial mixes should always be conducted to establish the exact dosage rates and water requirements per mix.
APPLICATION INSTRUCTIONS
MIXING
Sika-1 must be stirred slowly before use to ensure a homogeneous, lump free consistency.
Sika-1 shall be diluted in the gauging water. The dilution must be stirred slowly (to ensure a homogeneous, lump free consistency) prior to addition into the mortar/concrete mixer. It can also be added neat to the mortar/concrete mix provided that the mixture is properly mixed to achieve a homogeneous consistency.
APPLICATION METHOD / TOOLS
The standard rules of good concreting practice (con-cerning production, placing and curing) are to be followed. Refer to relevant standards.
Sika-1 may be combined with many other Sika products.
Note: Preliminary testing is required to prove the compatibility. Please contact Sika technical service for more information and advice.
VALUE BASE
All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
Sika-1 product information
Packaging | 5L and 25L Jerry can |
Appearance / Colour | Yellow liquid |
Shelf Life | 12 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging. |
Storage Conditions | Storage at temperatures between 5 °C and 30 °C. Protect from direct light, frost and contamination. |
Density | ~1.0 g/cm3 |
Total Chloride Ion Content | ≤ 0.1 % |
There are no reviews yet.