Rocatex Resin Residue Remover extended information
Coverage:
Light stripping | 8-10m² |
Deep stripping | 5m² |
DIRECTIONS
SHAKE WELL BEFORE USE.
Always test on a inconspicuous area prior to general use.
Preparation
Ensure that the surface to be treated is completely clean and dry. If necessary, first wash surfaces with ROCATEX Tile & Stone Renovator. Rinse well with water and leave to dry.
Removing Residues
Apply generously by dabbing or rolling onto the surface. Work in manageable areas at a time and do not brush out. Leave for up to 30 minutes. If drying should occur within 30 minutes apply a little more solution to keep it wet. Use a stiff short haired brush or nylon scrubbing pad to remove the softened residues from the surface. Add a little water and scrub again. Extract the released residues using a sponge or wet vac and
rinse with water. Repeat the process if unwanted material remains.
To Finish
Use ROCATEX Tile & Stone Renovator dilute 1: 5 in warm water. Apply with a light pressure sprayer or watering can. Agitate the surface using a deck brush or nylon scrubbing pad. Rinse by hosing off thoroughly with clean water. Do not use when surface temperatures are under 5°C or over 25°C.
STORAGE INFORMATION
Store in a cool, dry, frost free environment.
Shelf life up to 2 years for un-opened containers.
Once opened use within 6 months of purchase for optimum results.
OTHER
Do not apply during rain, frost, or when surface and air temp is under 5°C or over 30°C. Use gloves and protective goggles if there is a risk of direct contact or splashing. Empty containers are recyclable. Clean application tools and brushes with water after use. Once cleaned: Protect porous stone and porcelain with ROCATEX Paving & Stone Patio Sealer or ROCATEX Pre Grout Porcelain Tile Protector.
There are no reviews yet.