Laticrete 254 Platinum tile adhesive Pallet & Half Pallet Deals – 54 x 20Kg Grey / White

Laticrete 254 Platinum more information:

Coverage:

Trowel Size	m2
6 mm x 6mm notched trowel	6.7 - 8.0
6 mm x 9mm notched trowel	4.0 - 4.8
12 mm x 12mm notched trowel	3.3 - 3.8
Applied as bonding slurry coat#	8.0 - 10.0

Suitable Substrates:

• Exterior glue WBP Plywood*
• Properly prepared vinyl tile*
• Concrete/masonry
• Concrete block
• Cement mortar beds
• Non-water soluble cut-back adhesive*
• Cement terrazzo
• Cement backer boards**
• Gypsum wallboard*
• Gypsum plaster***
• Plastic laminate*
• Existing ceramic tile and stone

* Interior use only.
**Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
*** Sealed with 2 coats of NXT PRIMER

Limitations:

• For veneer installations using this product, consult local building code requirements regarding limitations and installation system specifications.
• Not for use directly over particle board, luan, Masonite® or hardwood floors.
• Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproofing membranes. When a waterproofing membrane is required, use a LATICRETE® HYDRO BAN Waterproofing Membrane.

Note: Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length (except where local building codes specify more stringent deflection requirements)

Cautions

Consult MSDS for more safety information.

• Some marbles and other stone have low flexural strength and may not be suitable for installation over wood floors.
• During cold weather, protect finished work from traffic until fully cured.
• Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
• Wait 14 days after the final grouting period before filling water features with water at 70°F (21°C).
• DO NOT take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
• For white and light–coloured marbles use LATICRETE® 254 Platinum WHITE. For green marble, resin backed tile and stone and other moisture sensitive marbles and agglomerates, use LATAPOXY® 300 Adhesive (refer to Data Sheet 633.0).
• Keep out of reach of children.

Laticrete 254 Platinum Working Properties:

Open Time	40 mins
Pot Life	2 hrs
Time to Heavy Traffic	24 hrs
Wet Density	1653 kg/m3

Note: Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length (except where local building codes specify more stringent deflection requirements)

Cautions
Consult MSDS for more safety information.

• Some marbles and other stones have low flexural strength and may not be suitable for installation over wood floors.
• During cold weather, protect finished work from traffic until fully cured.
• Use white mortar for white or light-colored stone.
• Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
• DO NOT take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator
  in dusty areas.
• For green, resin backed and moisture sensitive stones and agglomerates, use LATAPOXY® 300 Adhesive (refer to Data Sheet 633.0).
• Keep out of reach of children.

View other products by Luvanto here.