Everbuild Evercryl One Coat extended information
Application Information
Yield | ca. 0.75 m2 / kg |
Ambient Air Temperature | -5 °C to +35 °C |
Drying time | 6-7 days depending on temperature and thickness of coating. |
Usage
- General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions – for use on concrete, fibre/cement, roofing felt, mastic asphalt, existing bituminous roof coatings, rigid uPVC, corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc.
- Waterproofing guttering (plastic and metal), downpipes, gully’s, flashings, upstands, vents and leadwork.
Limitations
- Do not use in areas where subsequent solvent or oil contact is likely.
- Avoid inhalation of vapours.
- Do not use on Styrofoam or PVC foil.
- Using a primer before applying on new bitumen may cause bleeding – patch test first.
- As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability for use.
- If in doubt, contact technical services department for advice.
Everbuild Evercryl Application Instructions
No roof-coating product can be expected to repair an existing roof that is not structurally sound and stable. Before using a surface coating the roof structure should be inspected and, if necessary, put in order. All cracked, broken, slipped or missing slates, tiles, sheets or other forms of covering should be replaced or re-fixed and cracks in felt or asphalt filled. (Safety Re- commendation: do not coat roof lights, windows, glass or translucent sheets. These will constitute a hidden hazard if disguised). Preparation of the surface is of great importance and will influence the degree of adhesion and life of the renovation. All roof surfaces to be coated should be sound, stable, clean, i.e. free from loose debris, dirt, dust and grease. All traces of algae and fungi growth should be removed using a stiff-bristled brush. Where algae and fungi have been present, remove them completely and treat the surface with EVERBUILD 404 FUNGICIDAL WASH to kill any remaining spores, thereby discouraging the return of the growths.
Make good any holes or loose felt/slates/tiles etc. Fill holes/imperfections with BLACK JACK BITUMEN MASTIC. Stick down loose felt etc with BLACK JACK ROOF FELT ADHESIVE. Blisters in roofing felt must be cut, dried, re-bonded and sealed. New metal surfaces must be degreased with a suitable solvent. Remove all rust or treat rusty surfaces with a rust inhibitive primer (eg zinc phosphate based). Dilute EVERBUILD EVERCRYL ONE COAT with white spirits as a primer on porous / friable surfaces.
Everbuild Evercryl One Coat product information
Chemical Base | Modified acrylic re-enforced with Dralon fibres* in solvent blend. |
Packaging | 1 kg, 2.5 kg, 5 kg and 20 kg tins - Grey 5 kg tins - Black 5 kg tins - White 1 kg and 5 kg tins - Translucent |
Shelf Life | 24 months from date of manufacture in tightly sealed undamaged containers. |
Storage Conditions | Store in cool dry conditions away from all sources of ignition. Store between +5 °C and +25 °C. Do not exceed 60 °C. Will withstand frost. |
Colour | Black, Grey, White, Translucent |
Density | 1.05 g/cm³ |
Viscosity | Brushable paste |
Technical information
Elongation at Break | 500% |
Service Temperature | -25 °C to +100 °C |
Application
Follow all safety pre-cautions identified on label, Safety Data Sheet is available on website Downloads | Sika Limited or on request.
STIR WELL BEFORE USE. Apply by brush in a one coat at a rate of 1-2 litres per square metre. In extreme cases, a second coat may be applied 2-3 days after initial application.
Everbuild Evercryl Cleaning of Tools
Tools, brushes etc. with brush cleaner or white spirits.
There are no reviews yet.