£879.00 +VAT
Consumption:
| Tile size [cm] | Place of application | Recommended trowel tooth size [mm] | Consumptio n rate [kg/m2 ] |
|---|---|---|---|
| 2 x 2 | wall flooring | 4 4 | 1,3 1,3 |
| 10 x 10 | wall flooring | 4 6 | 1,3 2,0 |
| 15 x 60 | wall flooring | 6 8 | 2,0 2,5 |
| 20 x 25 | wall flooring | 6 8 | 2,0 2,5 |
| 25 x 40 | wall flooring | 6 8 | 2,0 2,5 |
| 30 x 30 | wall flooring | 6 8 | 2,0 2,5 |
| 30 x 60 | wall flooring | 8 10 | 2,5 3,0 |
| 40 x 40 | wall flooring | 8 10 | 2,5 3,0 |
| 50 x 50 | wall flooring | 8 10 | 2,5 3,0 |
| 60 x 50 | wall flooring | 10 12 | 3,0 3,5 |
| 70 x 70 | wall flooring | 10 12 | 3,0 3,5 |
| tiles of the type board*, e.g. 20 x 90 or 15 x 100 | wall flooring | 8 10 | 2,5 3,0 |
ATLAS GEOFLEX EXPRESS adhesive formulation uses the innovative technology of silicate gel in combination with fast-setting cement. This makes it possible to obtain:
– very rapid pre-setting, eliminating the possibility of building salts building up under the tiles and in their structure,
– rapid increases in adhesion and strength.
Silicate gel has a unique ability to bind water. Accumulation of a part of the mixing water ensures complete cement hydration, regardless of the type of the tiles. Thanks to appropriate water management, which is necessary to complete the setting process, the gel adhesive ensures full adhesion to substrates of various absorbency levels.
The use of silicate gel technology in combination with fast-setting cement offers the following benefits:
ATLAS GEOFLEX EXPRESS is manufactured as a dry mix of top quality cement binder, aggregates and special natural and synthetic modifiers.
Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after tiles installation). This ability enables to foot traffic and grouting just after 2 hours after tiles installation. The adhesive is recommended also for quick repairs of the floor (e.g. on balcony, terrace etc.)
The wide range of adhesive layer thicknesses (2-15 mm) allows:
– thin-coat cladding installation on even substrates,
– thin-coat cladding installation on uneven substrates, preceded by substrate floating,
– thick-coat cladding installation on uneven substrates, with no need for substrate floating
No cladding slip – enables installation of the cladding from top to bottom with no need of support at the fixing stage.
No shrinkage of the adhesive underneath the tile – no subsidence of the tiles during setting – works can be continued after a break with no risk of level difference.
Resistant to changing atmospheric conditions – allows for quick and safe works in various atmospheric conditions. Rapid strength gain by the adhesive limits possibility of damaging cladding during installation outside of the building.
| glazed tiles | + |
| terracotta | + |
| porcelain tiles | + |
| laminated tiles | use ATLAS ULTRA GEOFLEX |
| natural stone cladding (granite, marble, travertine, syenite, slate, etc.). | perform an application test* |
| clinker | + |
| stoneware | + |
| ceramic mosaic | + |
| glass mosaic | perform an application test* |
| glass, coloured, printed tiles, etc. | perform an application test* and check the recommendations of the tile manufacturer |
| concrete / cement mortar tiles | + |
| composite panels | use ATLAS ULTRA GEOFLEX |
| insulation and soundproofing panels | use ATLAS ULTRA GEOFLEX |
| small, medium and large format tiles: ≤ 0.50 m2 and with the length of the larger side ≤ 100 cm | + |
| large tile format (> 0.50 m2) | Use ATLAS ULTRA GEOFLEX |
| slim type tiles | Use ATLAS ULTRA GEOFLEX |
| residential buildings | residential buildings |
| public, educational, office and healthcare buildings | + |
| commercial and service construction | + |
| religious buildings | + |
| industrial buildings and multi- storey garages | use ATLAS ULTRA GEOFLEX |
| industrial warehouses | use ATLAS ULTRA GEOFLEX |
| traffic construction | use ATLAS ULTRA GEOFLEX |
| SPA facilities | use ATLAS ULTRA GEOFLEX |
| low-traffic areas | + |
| medium traffic areas | + |
| high traffic areas | + |
| kitchen, bathroom, laundry room, garage (in individual housing) | + |
| terraces | + |
| balconies, loggias | + |
| external slab stairs | + |
| external post stairs, e.g. cantilever stairs | use ATLAS ULTRA GEOFLEX |
| traffic routes | + |
| facades (including on thermal insulation systems) | use ATLAS ULTRA GEOFLEX |
| cladding of building plinths | + |
| process tanks, swimming pools, fountains, jacuzzis, balneotechnology (without aggressive chemicals) | use ATLAS ULTRA GEOFLEX |
| drinking water tanks | use ATLAS PLUS |
| saunas | use ATLAS ULTRA GEOFLEX |
| showers, washing facilities, rooms washed with large quantities of water | + |
| cement floors and screeds | + |
| anhydrite screeds | + |
| cement and cement-lime plasters | + |
| gypsum plasters | + |
| cellular concrete | + |
| brick or silicate block walls | + |
| brick or hollow brick walls | + |
| gypsum block masonry | + |
| concrete | + |
| terrazzo | + |
| mineral, dispersion and reactive sealing coatings | + |
| plasterboard drywall | + |
| screeds (cement or anhydrite) with water or electrical underfloor heating, | + |
| screeds with heating mat embedded in the adhesive | + |
| screeds with heating mat embedded in the adhesive | + |
| plaster with wall heating | + |
| gypsum boards | + |
| gypsum fibre boards | + |
| cement fibre boards | + |
| existing ceramic or stone cladding (tile on tile) | only inside |
| resin varnishes for concrete bound to the substrate | + |
| dispersive, oil painting coats, bonded with substrate | + |
| timber floors (thickness >25mm) | use ATLAS ULTRA GEOFLEX |
| wood-based flooring panels , minimum 22 mm thick, fixed with ATLAS M-System fasteners | + |
| OSB/3, OSB/4 and particle board on the floor (thickness > 25mm) | + |
| OSB/3, OSB/4 and particle board on the wall (thickness > 18mm) | + |
| metal and steel surfaces | use ATLAS ULTRA GEOFLEX |
| plastic surfaces | use ATLAS ULTRA GEOFLEX |
| Reaction to fire | A1/A1fl |
| Bond strength defined as: • Initial bonding • Early bonding | ≥ 1.0 N/mm2 ≥ 0.5 N/mm2 |
| Bond durability in conditioning/thermal ageing conditions defined as: bonding after thermal ageing | ≥ 1.0 N/mm2 |
| Bond durability in water/damp conditions defined as: bonding after immersion in water | ≥ 1.0 N/mm2 |
| Bond durability in freeze-thaw cycles conditions defined as: bonding after freeze- thaw cycles | ≥ 1.0 N/mm2 |
| Bulk density | approx. 1.4 g/cm3 |
| Mixing ratio (water/dry mix) | 0.24 ÷ 0.30 l / 1 kg 6.0 ÷ 7.5 l / 25 kg |
| Min/max. adhesive thickness | 2 mm ÷ 15 mm |
| Temperature of the adhesive preparation and of the substrate and surroundings during the work | from +5 °C to +35 °C |
| Maturation time | 5 minutes |
| Service life (stand-by time)* | approx. 45 minutes (mixing ratio 0.24 l/kg approx. 75 minutes (mixing ratio 0.3 l/kg |
| Open time* | min. 20 minutes |
| Adjustability* | 10 minutes |
| Walking on the floor/jointing* | after 2 hours |
| Pedestrian traffic load** | after 2-6 hours |
| Full operational loads - wheeled traffic** | after approx. 24 hours |
| Starting underfloor heating** | after 7 dats |
The substrate should be:
stable – sufficiently load-bearing, resistant to deformation, free of substances that reduce adhesion and seasoned.
even – the maximum thickness of the adhesive is 15 mm, for levelling substrates with larger irregularities, e.g. ATLAS ZW 330 levelling mortar, ATLAS SMS, SAM or POSTAR underlays can be used.
cleaned – from layers that may impair adhesion of the adhesive, in particular from dust, dirt, lime, oil, grease, wax, oil and emulsion paint residues. Substrate covered with algae, mould fungi etc., should be cleaned and protected with ATLAS MYKOS NR 1 or ATLAS MYKOS PLUS,
primed
– ATLAS UNI-GRUNT or ATLAS UNI-GRUNT ULTRA – when the substrate has excessive or non-uniform absorptivity,
– ATLAS GRUNTO-PLAST – when the substrate has low absorption or is covered with layers limiting adhesion,
– ATLAS ULTRAGRUNT – when tiles will be fixed on critical substrates.
damp proofed – when laying tiles on surfaces that are exposed to water
| Brands | |
|---|---|
| Units | 25Kg bags |
You must be logged in to post a review.
The web site is very easy to navigate, they have a great range of products and always a great value. The delivery was fast and on time. I would recommend this company to any one.
The guys at BuyThePallet are always very helpful and the prices are great. I can always rely on them to get the products we need when we need them, at very short notice.
Top quality service.
We have been using BuyThePallet for our levelling products for over two years now. Their customer support and attentiveness to our needs makes ordering and receiving goods a pleasant and easy step towards our next project. The prices are extremely competitive, delivery drivers are polite and accommodating and overall a brilliantly run business. If you want hassle a free company then these are the guys to buy from. NMA Flooring Ltd, Devon/Cornwall
Fantastic customer service and fast delivery, highly recommend
Great prices and a super quick delivery turnaround. Communication was perfect aswell. So much so I’ve ordered again.
They actually answered the phone, were polite, knowledgeable and the order was delivered in full and on time. Would fully recommend both on price and service. Thank you.
BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value
Great service, great price and great communications. We will definitely use Buy The Pallet again
I got great service from these guys. The products were at the right price and delivered very quickly. I would definitely recommend them and will be using them again.
Top quality service.
Companies like this a rare, great quick service, great price and easy to do business with. Will definitely use them again for all my supplies.
Great customer service and at an unbeatable price. All delivered on the day I needed it.
First class service, good price, fast delivery and the chap at the end of the phone knew what he was on about. Highly recommend and will use them again.
Great prices with a good ranges of products . Customer Service is excellent!
I purchased a pallet of these and I am very impressed from ordering to receiving my pallet and the delivery guys were very helpful as well .I will definitely recommend and use this company again .Highly recommend
Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive
Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.
There are no reviews yet.