Everbuild Fix & Fill Expanding Foam – Bulk Buy and Pallet Deals

EVERBUILD FIX & FILL Expanding Foam extended information

Characteristics

• Quick setting – can be cut, sawn or plastered in 1 hour.
• Economical in use – expands up to 55 times its original volume.
• Fills irregular and broad gaps where most conventional fillers would fail.
• Possesses insulating and sound deadening properties.

Expansion: 45 litres (750 ml can) 30litres (500 ml can)

Cell Structure: Medium fine

Temp Res of Cured Bead: Long Term: -40 to +80°C … | … Short Term: -40 to +100°C

Building Material Class: B3

Product Information

Packaging: 500 ml and 750 ml aerosol

Shelf Life: 15 months in original containers at stated storage temperatures.

Storage Conditions: Store upright between +5 °C and +25 °C. Pressurized container. Protect from sunlight and do not expose to temperatures above 50 °C. Do not pierce or burn the can even after use. Store as flammable liquid. Note: Elevated temperatures will reduce shelf life dramatically

Everbuild Fix & Fill Expanding Foam Technical Information

LIMITATIONS

• Carefully read instructions and text in warning box before use.
• Do not over-pressurize container.
• Always apply above +5 °C, ideally +20 °C (conditions and product).
• Clean spills immediately with Everbuild® FOAM CLEANER.
• When using EVERBUILD® FIX & FILL Expanding Foam, always remove nozzle from can and clean immediately after use with Everbuild® FOAM CLEANER.
• For fire rated joints, use Everbuild® FIREFOAM B1 in conjunction with Everbuild® FIREMATE®
• Once cured, dry foam must be removed mechanically or use FOAM EATER (always cut back and use on residues). No solvent will remove the product.

APPLICATION INSTRUCTIONS

SUBSTRATE PREPARATION

Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.

APPLICATION METHOD / TOOLS

ALWAYS WEAR PROTECTIVE GLOVES

Shake can well before use (about 20 times). Carefully fix nozzle. Do not overtighten or force.

ALWAYS USE CAN UPSIDE DOWN.

Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed whilst still wet with Everbuild® FOAM CLEANER. Cured foam must be removed mechanically or use FOAM EATER. When used for fixing door frames, supports must be used until the foam is fully cured.

• Please note: When transported in cars, keep upright and secured in boot, out of direct sunlight.When removing cured foam from skin, take care not to damage with abrasives.Grease skin with body lotion or similar.

  IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild® FOAM CLEANER before the foam has cured. Do not push any object into the valve as the contents may explode.