!FREE DELIVERY on Every Order (Most of Mainland UK) *
-0%
, , , , ,

Tilemaster – Standard Set Setaflex – Flexible Standard Setting S1 Floor & Wall Tile Adhesive 20Kg (grey/white) – Pallet Deals and Bulk Buy

TileMaster

Tilemaster Standard Set Setaflex S1 s:

  • polymer modified
  • flexible standard setting cement based wall and floor tile adhesive
  • increased adhesion and non-slip properties.

Formulated to give an extended pot life of approximately 3 – 4 hours, Tilemaster Standard Set Setaflex is ideal where longer working times are required.

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@buythepallet.co.uk

~ Free Delivery on Pallets & Half-Pallets, 3-5 Working Days ~

£455.30£523.70 +VAT

£455.30 £535.48 +VAT
£523.70 £630.79 +VAT
x

Tilemaster Standard Set Setaflex:

COVERAGE: 20kg will cover 5 – 6m² at 3mm thin bed application

Tilemaster Standard Set Setaflex is a polymer modified, flexible, standard setting cement based wall and floor tile adhesive with increased adhesion and non-slip properties. Formulated to give an extended pot life of approximately 3 – 4 hours, it is ideal where longer working times are required.

It has been developed for fixing a large variety of tiles such as ceramic, porcelain and natural stone and the extended pot life is ideal when fixing large format tiles, ceramic panels and also when faced with intricate and time consuming patterns and layouts.

Tilemaster Standard Set Setaflex is a S1 flexible adhesive with a high bond strength, making it ideal for fixing to substrates with limited movement and/or vibration, such as overlaid timber substrates and underfloor heating systems.

It is ideal for areas subject to prolonged or permanent wet conditions such as wet rooms and swimming pools. Tilemaster Standard Set Setaflex can be used internally and externally and it is unaffected by frost after setting.

Tilemaster Standard Set Setaflex technical data:

Standard ConformityConforms to EN 12004 C2 TE S1
Minimum Application Temperature5oC
Bed Thickness3mm – 12mm
Coverage20kg will cover approximately 5.5m2 with a 3mm solid bed application
Pot Life3-4hours at 23oC
Before GroutingApproximately 24 hours depending on temperature and substrate

The set time will be increased at lower temperatures and reduced at higher temperatures

* Tiling onto an impervious substrate with a non-porous tile will increase the set time.
Working Temperature of Cured Adhesive-40oC to 90oC
StorageStore unopened, clear of the ground in cool, dry conditions
Shelf LifeStored correctly this product has a shelf life of 6 months
ColoursGrey and White
Pack Sizes20kg
NoteAll work must be carried out in accordance with British Standard Code of Practice for floor and wall tiling BS5385

ADVANTAGES:

  • Genuine S1 flexibility making it highly suitable for a wide range of tiles and substrates
  • Extended pot life of 3 – 4 hours – ideal where longer working times are required
  • Suitable for fixing ceramic, porcelain and natural stone tiles
  • Developed for fixing to timber substrates
  • Ideal for use with Underfloor Heating Systems
  • Improved slip resistance, ideal when fixing large format tiles
  • Ideal for swimming pools & wet rooms
  • 3mm – 12mm bed depth
  • Internal & External use

TILES:

  • Ceramics
  • Porcelain
  • Marble
  • Travertine
  • Limestone
  • Slate
  • Granite
  • Terracotta
  • Mosaics
  • Quarry

SURFACE / SUBSTRATE:

  • Sand/Cement Screed
  • Concrete
  • Plywood Overlay (12mm min)
  • Electric Underfloor Heating
  • Water/Wet System Underfloor Heating
  • Tile Backer Boards
  • Gypsum Plaster
  • Tile Backer Boards
  • Existing Ceramic, Porcelain and Natural Stone Tiles
  • Flooring Grade Asphalt & Bitumen
  • Anhydrite Screeds
  • Plaster
  • Plasterboard
  • Fibre Cement Sheets
  • Cement/Sand Render
  • Concrete Brick/Block
  • Existing Vinyl Tiles

WORKING WITH TILEMASTER STANDARD SET SETAFLEX

N.B. Tilemaster Standard Set Setaflex is suitable for use with natural stone tiles, but given the unique characteristics of natural stone tiles it is advised that any stone is checked and tested for suitability before fixing commences.

PREPARATION:

Before starting, all substrates must be rigid, clean, dry, sound and strong enough to support the weight of the tiles, tile adhesive and grout. Remove all dust, dirt, oil, grease and other contaminants that may affect adhesion.

MIXING & APPLICATION:

Always mix powder to water and mix to a smooth, lump free consistency. As a guide for powder to water ratio, 20kg of powder requires approximately 4.4 – 4.6 litres of water. Never add water after initial mixing, as this will impair the strength of the adhesive. Product that has started to set must be discarded.

Key the adhesive into the substrate and trowel out to the required adhesive bed thickness using a notched trowel. Within the open time of the adhesive, bed in the tiles ensuring that there is full, solid bed coverage under the tiles. Regular checks should be carried out to ensure that there are no hollow pockets or voids beneath the tile.

Back buttering tiles will help achieve solid bed fixing and will significantly increase the bond strength.

Clean surplus adhesive from the tiles and joints as soon as possible, as set adhesive will prove very difficult to remove later. Clean tools immediately after use with clean water.

GROUTING:

Do not start grouting until the adhesive has set. This time can vary depending on temperature and site conditions. Impervious surfaces may extend the set time. In ideal conditions grouting can begin after 24 hours. If you are tiling an area with limited movement/vibration then you must use a flexible grout such as Tilemaster Grout 3000.

TILEMASTER STANDARD SET SETAFLEX MATERIAL SAFETY DATA SHEET (MSDS)


View other products by Tilemaster Adhesives here.

Brands

Class

S1

Colour

White, Grey

Units

20Kg bags

COVERAGE: 20kg will cover 5 – 6m² at 3mm thin bed application

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tilemaster – Standard Set Setaflex – Flexible Standard Setting S1 Floor & Wall Tile Adhesive 20Kg (grey/white) – Pallet Deals and Bulk Buy”

There are no reviews yet.

 

Buy The Pallet - Tile Adhesive and Floor Levellers Discount Store

5.0Out of 5 stars

Overall rating out of 15 Google reviews

Dom
19 hours ago

BTP very helpful in supplying a pallet of floor leveller. I needed it on the Saturday, but didn’t want it sitting on the driveway for several days. I called and they recommended ordering for Thursday to give a day’s grace in case of any delivery issues. In the event the pallet arrived on Thursday as requested. Reliable and good value

Gary Harper
a month ago

Great service, great price and great communications. We will definitely use Buy The Pallet again

Adrian W
3 months ago

Great service and delivery! Ordered all that I needed in one go and it was delivered to the back door wrapped and protected from the snow! Pallet even made it so that the goods were dry off the ground.

Stephen Tucker
3 months ago

Great customer service and at an unbeatable price. All delivered on the day I needed it.

Boon Teo
3 months ago

Great prices with a good ranges of products . Customer Service is excellent!

Max Simpson
5 months ago

Very helpful!

Neil Salih
3 years ago

Marc. T
3 years ago

Very helpful

Richard Fairlie
3 years ago

Great service and really good pricing! Super fast delivery and really lovely guy!

Kev in
3 years ago

Amazing knowledge and great prices! Definitely using these guys on a regular basis for my pallet deals on levellers and adhesive

Rob Faulkner
3 years ago

Fantastic experience with Buy The Pallet. Everything I needed to complete a large flooring project, quick delivery & quality products.