Rocatex Cement Grout & Salt Residue Remover – Bulk Buy

Rocatex Cement Grout & Salt Residue Remover further information

Coverage:

DIRECTIONS

In mild cases and on non-absorbent surfaces: Dilute 1 part Cement, Grout & Salt Residue Remover in 4 parts cool water. Apply evenly to the surface using a light pressure sprayer or watering can. Leave for up to 30 minutes keeping surfaces wet with more solution if necessary. Scrub with a deck brush or nylon scrubbing pad and rinse with water.

In more severe cases: Dilute 1 part Cement, Grout & Salt Residue Remover in 1 part cool water. Apply liberally and agitate immediately using deck brush, nylon scrubbing pad or rotary scrubbing machine. Leave for 5-10 minutes, keeping surfaces wet with additional solution. Scrub again and rinse with water.

In extremely severe cases: Dampen the surface with a little water and apply undiluted. Agitate with a nylon pad, scrubbing brush or mechanical scrubber. Immediately extract using a good quality sponge or wet vac and rinse thoroughly with clean water. N.B. Always rinse surfaces thoroughly with cool clean water.

Rocatex Cement Grout & Salt Residue Remover NOTES

Not suitable for use on surfaces that are highly polished, (i.e. polished marble, polished travertine or polished limestone). Any contaminated surface should be rinsed off immediately with plenty of clean water. Do not use when surfaces are very cold or very hot. Ideally between 5 – 25°C.

STORAGE INFORMATION

Store in a cool, dry, frost free environment ideally at 5 – 25°C. Shelf life up to 2 years if container is unopened.

For health & safety & environmental information check the document at Rocatex -> here.