Tilemaster Super Flow 30 has excellent flow and adhesion properties making it suitable for a wide range of both commercial and domestic applications. These unique properties ensure that Tilemaster Super Flow 30 can be used with confidence without the need to prime the large majority of substrates. Tilemaster Super Flow 30 is suitable for use over a wide range of substrates including sand/cement screeds, concrete, flooring grade asphalt/bitumen, ceramic, porcelain and terrazzo tiles, rigid steel, moisture tolerant old adhesive residues, epoxy damp proof membranes and plywood.
Once mixed, Tilemaster Super Flow 30 will remain workable for 10 – 15 minutes and it will accept light foot traffic after 30 minutes in ideal conditions. Decorative floor coverings can be installed after 90 minutes and ceramic tiles can be applied after 45 – 60 minutes. Tilemaster Super Flow 30 can be applied from depths of 2mm-– 15mm in one application.
ADVANTAGES:
- Install decorative floor coverings after 90 minutes and ceramic tiles after 45-60 minutes
- Apply directly to a DPM within 24 hours without priming
- Suitable for use over old adhesive residues including bitumen
- Moisture tolerant – can be used below a DPM
- Excellent flow and self-levelling properties
- Excellent adhesion properties without priming most substrates
- Ideal for use above underfloor heating systems
- Ideal for timber substrates
- Low odour
- Protein free
IDEAL FOR:
- Sand/cement screed
- Concrete
- Plywood Overlay (6mm min)
- Electric Underfloor Heating
- Water / Wet System Underfloor Heating
- Tile Backer Boards
- Existing Ceramic, Porcelain and Natural Stone Tiles
- Flooring Grade Asphalt & Bitumen
- Anhydrite Screeds
- Existing Vinyl Tiles
- Steel/Metal Surfaces
- Epoxy DPM
- Existing Adhesive Residues
- Green Screed
- Fibreglass