Mapei Ultraplan Renovation Screed 3240 – Fibre Reinforced Self Levelling Compound 25Kg – Pallet Deals & Bulk Buy

Mapei Ultraplan Renovation Screed 3240 further information:

Coverage: approx. 6m2 at 3mm thickness.

Can be hand or pump applied.

Where To Use

Used for interior levelling, smoothing and infilling differences in thickness from 3 to 40 mm on new or existing concrete, screeds, stone, terrazzo and ceramic tiles, old and new timber floors, floor boards, chipboard panels, plywood for use in dry locations as an underlayment for floor finishes such as tile, stone, vinyl, carpet and wood flooring.
Ultraplan Renovation Screed 3240 is suitable where good resistance to loads is required, also for castor wheel traffic and underfloor and undertile heating systems.

~* Mapei 3240 from us comes with Free Upgraded Express Next Working Day Delivery *~

Mapei Ultraplan Renovation Screed 3240 technical data

Application data

Final Performances

Preparation of the Substrate

The substrate should be solid, free of dust, loose particles, paint, oil, gypsum residues or other contamination that could compromise the bond. Timber substrates should be clean and solidly fixed, open joints should be sealed with Planiprep Skimcoat. Cementitious surfaces that are not sufficiently compacted must be removed or, where possible, consolidated with Prosfas or Primer EP. Cracks in the substrate should be repaired with Eporip.

The substrate should be primed with Mapei Eco Prim Grip or Mapei Eco Prim T Plus prior to the application of Mapei Ultraplan Renovation Screed 3240. For marine use apply a thin coat of MAPEI Eco Prim Marine onto the clean dry surface without leaving pools of primer and the surface. allow the primer to dry (35-40 minutes) then apply MAPEI Ultraplan Renovation Screed 3240.

Preparing the mix

Pour a 25 kg bag of Ultraplan Renovation Screed 3240 into a bucket containing 4.25-4.5 litres of clean water and mix with a low speed electric mixer to obtain an homogeneous, self-levelling, lump free mix. Larger quantities of Ultraplan Renovation Screed 3240 can be prepared in suitable mixers.

After 2-3 minutes of slackening, the mix should then be restirred and then it is ready for use.
The amount of Mapei Ultraplan Renovation Screed 3240 mixed at any time must be used within 20 minutes
(at a temperature of +23°C).

Application

Apply in a single coat from 3 to 40 mm in thickness. To minimise aeration a spiked roller may be used.
The self levelling properties of Mapei Ultraplan Renovation Screed 3240 will provide a surface ready to accept all kinds of floor coverings.

Pack Size

25 kg bags.

Mapei Ultraplan Renovation Screed 3240 – Storage

12 months in a dry place and in the original unopened packaging.