Laticrete 335 Super Flex more information:
Coverage:
Trowel Size | m2 |
---|---|
6 mm x 6mm notched trowel | 6.6 - 8.0 |
6 mm x 9mm notched trowel | 5.0 - 5.9 |
12 mm x 12mm notched trowel | 3.3 - 4.0 |
Uses:
- For use in interior, exterior & fully immersed applications
- Suitable for use in wet & dry areas including kitchens, bathrooms, wet-rooms.
- Fixes ceramic, stone & porcelain tiles to all substrate types including impermeable surfaces, WBP exterior glued plywood and heated sub-floors
- Ideal for use in applications where a long open time is preferred.
- The long open time and high grab properties of this adhesive are optimised for fixing all tiles including porcelain and glass.
Laticrete 335 Super Flex Suitable Substrates:
- Cement floor screed
- Concrete block & Render
- Ceramic tile & stone
- Heated sub-floors
- Masonryandbrick
- Gypsum & Anhydrite
- Tilebackerboard*
- Gypsum plasterboard
- Exterior glue WBP Plywood***
*Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
** Sealed with 2 coats of NXT Primer
*** Interior only
Packaging: 20 kg bag
Limitations:
- Mastics, adhesive mortars and pointing mortars for ceramic & stone tiles are not replacements for waterproofing membranes or air and water barriers. When a waterproofing membrane or air and water barriers is required, use LATICRETE® HYDROBAN Air & Water Barrier (see data sheets DS 633.0 & DS 633.5 for more information).
- Use the white version of LATICRETE® 335 mortar for installing white or light coloured marble or stone.
- Not for use over hardwood or strip wood flooring, particle board carpet adhesive, vinyl tile cutback adhesive or plastic laminates.
- Do not apply directly over expansion/movement joints or structural movement cracks.
- Note: Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes.
- Use LATAPOXY® 300 Adhesive for installing green marble,
Cautions:
Consult MSDS for more safety information.
- Some marbles and other stone have low flexural strength and might not be suitable for exterior installations, check with tile manufacturer for suitability.
- During cold weather, protect finished work from traffic until fully cured.
- Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
- DO NOT take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
- For white and light-coloured stone, conduct test area to ensure no shadowing or staining is observed.
- Keep out of reach of children.
There are no reviews yet.